532059

AT-T TL88102 Manual

82
Zoom out
Zoom in
Previous page
1/110
Next page
76
Adding and registering handsets
The handset provided with your telephone system is already registered
as HANDSET. Additional handsets registered to the telephone system are
assigned in sequential order. If you register another new handset to your
telephone system, the new registered handset is assigned HANDSET 2.
Then your first handset is renamed as HANDSET 1. This telephone system
accommodates up to 12 handsets.
You can add new handsets (TL88002, purchased separately) to your
telephone system, but each handset must be registered with the telephone
base before use. When first purchased, each expansion handset shows
Press [HOLD] on base for 4 sec, then press [#] on handset
. You may need
to charge the handset before registering to the telephone base. For more
details on battery charging, see the table on page 8.
Register a handset to the telephone base
1. Before you begin registration, make sure the handset displays Press
[HOLD] on base for 4 sec, then press [#] on handset.
2. Place the unregistered handset in the telephone base.
3. Press and hold HOLD on the telephone base for about four seconds until
the telephone base displays Registering handset... While the handset
is still in the telephone base, press # (pound key) on the handset. The
handset shows Registering... Please wait and it takes up to 60 seconds
to complete the registration. The handset and the telephone base show
HANDSET X Registered (X represents the handset number assigned) and
you hear a beep when the registration completes.
NOTES:
If the registration fails, the handset shows Registration failed. To reset the handset, unplug
the power from the telephone base and the battery from the handset for a few seconds then
plug them back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
•
•
#
HOLD
Appendix
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T TL88102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T TL88102 in the language / languages: English as an attachment in your email.

The manual is 16,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info