Manual AT-T SYN 248 (page 49 of 116) (English)

532085

Zoom out

Zoom in

1/116

Syn248 Installation and Configuration Guide Back to Contents

System Configuration 48

4. You can enter a new extension number in the range 100–999 into the Change

Extension Number to box. The first digit of the extension number need not match

the default extension number first digit.

5. You can select Call Forward/Transfer to Outside Telephone Number to enable

or disable forwarding or transferring of calls to an external number. This function is

enabled by default and uses two outside lines when calls are forwarded. Disabling

this function prohibits the user from setting the Call Forward All target to Phone #.

6. Change the Intercom Call Forward–No Answer Settings:

a. Select the Target for unanswered calls:

 Off. The extension rings until the call is answered or the caller hangs up.

Conference room extensions typically have Call Forward–No Answer Settings

set to Off and have their ringers set very low or off.

 Voicemail.

 Extension.

 Outside Phone Number.

Ensure that the extension is not in use and do not assign an extension number

with the first digit of any extension that is the same as an Auto Attendant

menu digit key value, as callers will be unable to dial that extension. Instead,

they will be connected to that Auto Attendant menu action. See “Configuring

the Auto Attendant” on page 33.

Desksets do not lose their assigned extensions even if a Deskset is disconnected

and unplugged. If you want to remove a Deskset from the system, the Deskset

must be deleted using the WebUI. (See “Deleting Devices” on page 56.) This

ensures that the extension number becomes available again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AT-T SYN 248 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AT-T SYN 248 Manual

Product: