532085
13
Zoom out
Zoom in
Previous page
1/116
Next page
Syn248 Installation and Configuration Guide Back to Contents
Installation 12
Placement Considerations
Avoid placing any Syn248 component too close to the following:
Communication devices, such as television sets, DVD players, or other cordless
telephones
Excessive heat sources
Noise sources, such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting
Excessive dust sources, such as a workshop or garage
Excessive moisture
Extremely low temperature
Mechanical vibration or shock, such as on top of the washing machine or
workbench.
Power Considerations
Ensure that there is an electrical outlet not controlled by a wall switch within 6 feet
(1.83 m) of each device location.
SB35020 Desksets are also compatible with Power over Ethernet (PoE). To use PoE, your
network needs a switch that provides PoE. Using PoE simplifies your installation by
eliminating the need to route separate power cords. It also allows you to protect your
system from power outages by connecting an Uninterruptible Power Supply (UPS) to your
PoE switch and Gateway(s). For power requirement specifications, see “Appendix C:
Technical Specifications” on page 105.
Other Preparations
Before installing the Gateway and Desksets, the following preparations may need to be
taken:
All telephone lines must be gathered into one access point situated no more
than 9 feet (2.74 m) from the Gateway location. If rewiring is required, contact
your telephone service provider and request the help of a qualified technician.
You may need one or more network switches set up to ensure there are sufficient
ports available for other devices in the network (such as a DSL modem).
If you plan to use the emergency bypass feature on the Gateway, you will need
an analog phone.
An Ethernet Port must be available within 9 feet (2.74 m) of each Deskset
location. Each Deskset is capable of sharing an Ethernet port with a PC. If one
Ethernet port already exists at a workstation, another port is not necessary
unless you need a GigE Ethernet frame rate. If this is the case, use a separate
Ethernet connection for the Deskset and the computer.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T SYN 248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T SYN 248 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info