532045
49
Zoom out
Zoom in
Previous page
1/82
Next page
44
Answering system operation
Answering system overview
Voice prompts
The system provides voice prompts to guide you through recording
announcements and remote access.
Message capacity
The answering system can record up to 99 messages, depending on the
length of each message. Individual messages can be up to four minutes, and
the approximate recording time is 14 minutes. The actual recording time
depends on individual message characteristics. Messages remain available for
replay until you delete them.
If the answering system has less than three minutes of recording time left,
the remaining time is announced at the end of messages playback.
If the memory is full, the answering system announces, “Memory is full.” The
number of messages and F flash alternately in the message window, and
REC MEM FULL appears on the handset screen. You must delete some
messages before recording new ones.
Call screening
If the answering system and call screening are on, the announcement and
the incoming message broadcast at the telephone base when a call arrives.
You can turn call screening on or off using the handset
(see Call screening setup on page 17). When call
screening is off, you can temporarily turn on the call
screening by pressing PLAY/STOP or VOLUME on
the telephone base. The call screening will be off for the
next incoming call.
If call screening is on and you want to adjust the
playback volume to a comfortable level (1-8) while it is recording messages,
press VOLUME on the telephone base. This volume setting is shared with
message playback, so when you play messages at volume 1, they play at a
very low volume. If you turn up the volume for playback, the call screening for
the next incoming message plays at the same volume level.
If call screening is on and you want to silence the telephone base while it
is recording messages, press PLAY/STOP on the telephone base. The call
screening will be on for the next incoming call.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T EL52400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T EL52400 in the language / languages: English as an attachment in your email.

The manual is 14,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info