532031

AT-T CL84342 Manual

54
Zoom out
Zoom in
Previous page
1/117
Next page
Multiple handset use
48
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and
the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on the
initiating handset or /SPEAKER on the initiating telephone base. The
PTT call ends automatically and the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on any one
of the destination handsets, or press /SPEAKER on the destination
telephone base. That device answers the outside call. The PTT call
continues for the rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base.
The telephone continues to ring.
Make an outgoing call during a PTT call
During the PTT call, press PHONE/FLASH on your handset or /SPEAKER
on your telephone base to get a dial tone. The PTT call ends automatically.
During the PTT call, press PHONE/FLASH on the initiating handset
or /SPEAKER on the initiating telephone base. The PTT call ends
automatically and you get a dial tone.
During the PTT call, press PHONE/FLASH on any one of the destination
handsets or press /SPEAKER on the destination telephone base. That device
gets a dial tone. The PTT call continues for the rest of the PTT participants.
End or leave a PTT call
The initiating device can end the PTT call. If any one of the destination devices
leaves the PTT call, the call continues until all participants or the initiator hangs up.
Press OFF/CANCEL on the handset or place the handset in the charger, or
press CANCEL on the telephone base. The screen shows Push to talk Ended.
NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the
PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or
PTT on the telephone base within 10 seconds, the PTT call ends automatically.
•
•
•
•
•
•
•
Push-to-talk (PTT)
Press PHONE/FLASH or any dialing key (0-9,
#
or TONE ) on the destination
handset, or press /SPEAKER or any dialing key (0-9,
#
or TONE ) on the
telephone base or lift the corded handset to answer. Both devices show Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the charger, or press CANCEL on the telephone base. Both
screens show Intercom ended.
3.
4.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T CL84342 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T CL84342 in the language / languages: English as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info