532038
60
Zoom out
Zoom in
Previous page
1/90
Next page
Answering system
54
Message playback
When messages are playing on the handset:
Press PHONE/FLASH to stop playback. The screen shows Call back?, then
press MENU/SELECT, PHONE/FLASH, or /SPEA�ERSPEA�ER to call back the
caller if the caller’s number is available. If the dialing format used is not
correct, then use the option below to choose the correct dialing format
before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information
if available. From here, you can press OFF/CANCEL to resume playback,
press # (pound key) to show different dialing options (page 42), or press
PHONE/FLASH or /SPEA�ERSPEA�ER to call back the caller. If you do not call
back within 10 seconds, message playback resumes automatically.
Press qCID/VOLUME or pDIR/VOLUME to adjust the message playback volume.
Press EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press MUTE/DELETE to delete the message.
Press 5 to stop the playback.
Press /SPEA�ERSPEA�ER to switch between speakerphone mode and handset mode.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
Delete all old messages
You can only delete old (reviewed) messages. You cannot delete new messages
until you review them. You cannot retrieve deleted messages.
To delete all old messages on the telephone base:
1. When the telephone is idle, press X/DELETE. The system
announces, “To delete all old messages, press
DELETE again.
2. Press X/DELETE again. The system announces, All old
messages deleted.
To delete all old messages on the handset:
1. Press MENU/SELECT when in idle mode to enter the
main menu.
2. Press qCID or pDIR to scroll to >Answering sys. Press
MENU/SELECT.
3. Press qCID or pDIR to highlight Delete all old, then press
MENU/SELECT. The screen shows Delete all old messages?
4. Press MENU/SELECT again to confirm. The screen displays Deleting... then
All old msgs deleted! There is a confirmation tone.
Announcement
>Delete all old
p
q
Delete all
old messages?
Deleting...
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T CL82321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T CL82321 in the language / languages: English as an attachment in your email.

The manual is 10,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info