532038
35
Zoom out
Zoom in
Previous page
1/90
Next page
Multiple handset use
29
2. Press and hold PUSH TO TAL� on your handset. A chirp
indicates your microphone is on. Speak towards the
handset. Your voice is broadcast to the destination handset.
While you are speaking, your handset screen shows
PTT To handset: X.
3. Release PUSH TO TAL� after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TAL� to
continue speaking or the destination handset can respond (see Answer a
PTT call on the next page).
4. To end the PTT call, press OFF/CANCEL or place the handset in the
telephone base or charger. The handset screen shows Push to talk Ended
for a few seconds.
PTT call to a group of handsets
When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls
when 2 to 5 handsets are registered, and a maximum of one-to-three calls
when 6 or more handsets are registered. The first 4 registered handsets will be
able to use this feature. Other handsets can only use PTT for one-to-one calls.
To call a group of handsets:
1. You have three ways to call a group of handsets. When the handset is not
in use:
Press and hold PUSH TO TAL� until your handset screen shows
Connecting to group...
Press PUSH TO TAL�. Press qCID or pDIR to choose Group. Press
MENU/SELECT or press and hold PUSH TO TAL� until your handset
screen shows Connecting to group...
Press PUSH TO TAL�. Press TONE and # (pound key). The screen
shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other handsets automatically activate.
2. You need to press and hold PUSH TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all eligible handsets.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call on page 29).
NOTE: After PUSH TO TAL� is released, the PTT call remains open for a short time. If no
one presses PUSH TO TAL� within 10 seconds, the PTT call ends automatically.
Push-to-talk (PTT)
PTT To
handset: X
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T CL82321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T CL82321 in the language / languages: English as an attachment in your email.

The manual is 10,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info