532023

AT-T CL81101 Manual

33
Zoom out
Zoom in
Previous page
1/72
Next page
Multiple handset use
28
NOTE: After PUSH TO TAL� is released, the PTT call remains open for a short time. If no
one presses PUSH TO TAL� within 10 seconds, the PTT call ends automatically.
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and the screen
shows Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
handset shows PTT From HS X To HS X (the first X represents the initiating
handset number, the second X represents your handset number; a maximum
of four handset numbers appear).
When your speakerphone light is off (the screen shows
Press and hold [PTT] to talk), press and hold PUSH TO TAL� on your
handset. You will hear a chirp. Speak towards the handset.
While you are speaking, your handset screen shows PTT To handset: X
(X represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TAL�. Your handset will beep. After the beep,
if your speakerphone light is off, you can press and hold PUSH TO TAL� to
continue speaking, or the destination handset can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your handset screen shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows
>
Intercom.
2. Press MENU/SELECT. Your handset displays Calling other handset or Calling
HANDSET X. The destination handset screen briefly shows Push to talk
Ended and then Other handset is calling or HANDSET X is calling. The
destination handset rings.
3. On the destination handset, press PHONE/FLASH or any of the dialing keys (0-9,
#, TONE or ) to answer the intercom call. Both handsets now show Intercom.
4. To end the intercom call, press OFF/CANCEL or place the handset in the
telephone base or charger. Both screens show Intercom ended.
1.
2.
3.
•
•
Push-to-talk (PTT)
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T CL81101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T CL81101 in the language / languages: English as an attachment in your email.

The manual is 7,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info