576950
7
Zoom out
Zoom in
Previous page
1/22
Next page
10
The Robotic Cleaner is shipped with the following manufacturer
default values:
Cycle Time
Delay Time
Cleaning Level
Pool Length
Pool Type
The Robotic Cleaner will operate according to the manufacturer
default values unless those values are manually changed (see
“Programming the Robotic Cleaner”).
Programming values are stored in the Power Supply memory even
after the Robotic Cleaner is shut off (Power OFF).
LARGE UNITS: Are all units equipped with 2 pump motors for suction
SMALL UNITS: Are all units equipped with 1 pump motor for suction
Programming
3 hours
No delay
Regular
50m
Rough Ceramic
2. Programing your pool cleaner
Use the following procedure to program your Robotic Cleaner:
A. PRESS THE GREEN POWER “ON” BUTTON UNTIL YOU HEAR
A CLICK; OK flashes for four seconds and then disappears (the
Power Supply runs a self-test).
OFF
ON
Note: Programmed values are stored in memory. Therefore the
Robotic Cleaner will always start working according to last
programmed values.
B. IF THE (X) SYMBOL APPEARS, A FAILURE HAS OCCURRED.
See the Error code in the information page .
Set the Cycle Time according to the amount of debris in the pool.
Increase the Cycle Time accordingly.
a) Press Select . The Cycle Time indicator and the Time
Display 03:00 both flash.
b) Press Set until the desired Cycle Time is displayed.
For example, press twice to display a Cycle Time of 7 hours.
c) Press Select
the Time Display stops flashing and the Cycle Time is set.
the next programming mode appears on the display.
3. To set the operation time
Note:
The Robotic Cleaner does not stop operating while the Cycle Time
is being set.
The Operation Time indicator is active and the Clock records the
operation time.
If Select is not pressed after setup, the Operation Time indicator is
automatically activated after 60 seconds. Same logic applies to all
other presets
OFF
ON
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Astralpool Typhoon Max Commercial Pool Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Astralpool Typhoon Max Commercial Pool Cleaner in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info