673139
35
Zoom out
Zoom in
Previous page
1/180
Next page
IT
DE
ES
PT
FR
EN
V.2016-10-01
2 - 28
29 - 55
56 - 82
83 - 109
110 - 138
139 - 165
MODELS EVOLine 6 EVOLine 10 EVOLine 13 EVOLine 15 EVOLine 17 EVOLine 20 EVOLine 25M EVOLine 25 EVOLine 35
CODES 66069 66070 66071 66072 67405 66073 66074M 66074 66075
www.astralpool.com
Advice to customers
1. Please read this manual carefully before installing the product, otherwise you could
damage the heat pump, injure users or incur financial losses.
2. As advances in science and technology are made, the product will also improve.
We would therefore urge you to keep up to date with the latest products.
3. If you require further technical information, please contact your local distributor.
4. Note:
4.1 Before installing the heat pump, check that your local power supply meets the requirements of the
heat pump.
For full details, check the unit's label or the performance information that appears in this manual. 4.2
Fit the electrical protection devices in compliance with local regulations.
4.3 You must earth the heat pump in order to prevent electric shocks caused by an unexpected short
circuit in the unit.
4.4 There is a diagram of the wiring in this manual.
4.5 For safety reasons, you should not replace or repair the heat pump yourself. If it required repairs,
please contact your local distributor for assistance.
4.6 Do not place objects inside the heat pump while it is working. They could come into contact with
the fan and damage it, as well as cause accidents (especially in the case of children).
4.7 Do not use the heat pump without the grille or plaque, as this could cause accidents or the unit to
malfunction.
4.8 If the unit fills with water, contact your local distributor immediately.
The unit may only be reset following a full inspection by a qualified service engineer.
4.9 Unqualified service engineers may not adjust the unit's switchboards, valves or controllers.
2
Index
1. Performance and installation
1.1 Performance and features …………………………………………………………………………………………………………………………….… 4
1.2 Working principles……………………………………………………………………………………………………………….……….……………………. 4
1.3 Location of heat pump installation ………………………………………………………………………………………………………………..….. 5
1.4 Distance from the pool ……………………………………………………………………………………………………………………..………………. 6
1.5 Installation of the check-valve …………………………………………………………………………………………………………………………… 6
1.6 Pool system set up …………………………………………………………………………………………………………………………………………….. 7
1.7 Connecting the by-pass ……………………………………………………………………………………………………………………………………… 7
1.8 Warning …………………………………………………………………………………………………………………………………………………………….. 8
1.9 First time start-up ……………………………………………………………………………………………………………………………………………… 8
1.10 Condensation ……………………………………………………………………………………………………………………………………………….. 8
2. Operation of heat pump
2.1 Operation of control display ………………………………………………………………………………………………………..……………………. 9
2.1.1 Control display illustration ……………………………………………………………………………………………………………………………… 9
2.1.2 Power ON/OFF heat pump………………………………………………………………………………………………………………………………. 10
2.1.3 How to change mode ……………………………………………………………………………………………………………………………………… 10
2.1.4 Adjust desired water temperature ……………………………………………………………………………………..………………………..… 11
2.1.5 Check the parameters……………………………………………………………………………………………….…………..……………………… 11
2.1.6 Setting Time …………………………………………………………………………………………………………………………………………………….11
2.1.7 Setting Timer ON / Timer OFF …………………………………………………………………………………………………………………………. 12
2.1.8 Cancellation of Timer OFF ………………………………………………………………………………………………………………………..…….. 12
2.1.9 Key pad lock …………………………………………………………………………………………………………………………………………………….12
2.2 Operation of APP controller ………………………………………………………………………………………………………………………………. 15
2.2.1 Working principle of APP control ……………………………………………………………………………………………………………………. 15
2.2.2 Set up of the network …………………………………………………………………………………………………………………………………….. 15
2.2.3 APP operation ………………………………………………………………………………………………………………………………………………… 17
3. Protection systems
3.1 Water flow switch …………………………………………………………………………………………………………………………………………… 21
3.2 Refrigerant gas high and low pressure protection ……………………………………………………………………………………………… 21
3.3 Overheating protection on the compressor ………………………………………………………………………………………………………. 21
3.4 Automatic defrost control …………………………………………………………………………………………………………………………………. 21
3.5 Temperature difference between inflowing and outflowing water ……………………………………………………………………. 21
3.6 Low temperature cut-out ………………………………………………………………………………………………………………………………….. 21
3.7 Anti-frost protection during winter ……………………………………………………………………………………………………………………. 21
3.8 First anti-frost protection ………………………………………………………………………………………………………………………………….. 21
3.9 Second anti-frost protection ……………………………………………………………………………………………………………………………… 21
4. Direction
4.1 Swimming pool water chemistry ……………………………………………………………………………………………………………………….. 22
4.2 Heat pump winterizing ……………………………………………………………………………………………………………………………………. 22
4.3 Restarting the pump after winter ………………………………………………………………………………………………………………………. 22
4.4 Check-up ………………………………………………………………………………………………………………………………………………………….23
5. Maintenance and inspection
5.1 Maintenance ……………………………………………………………………………………………………………………………………………………… 23
5.2 Trouble shooting guide ……………………………………………………………………………………………………………………………………… 24
5.3 Failure code table for AP board …………………………………………………………………………………………………………………………. 26
6. Exploded view ………………………………………………………………………………………………………………………………………………….. 27
7. Product recycling …………………………………………………………………………………………………………………………………………….. 27
3
4
Air ou
t
Air in
Air in
Not less than 500mm
Not less than 2000mm
Not less
than 500mm
Not less
than 500mm
Not less than 500mm from the top
Free space requirement for the horizontal heat pump
Air in
A
ir in
Air in
More than 500mm
Not less than
500mm
Not less than
500mm
Not less than 1000mm
Not l
ess than 3000mm from the top
Air ou
t
Free space requirement for the vertical heat pump
Model: Vertical Unit
Model: Horizontal Unit
5
6
7
FIGURE 1 - POWER CONNECTION on page 28
8
9
Press MODE button to selec auto, heating or cooling mode, related indicator icon will be lightened
as a symbol to show heat pump is in either auto , heating , or cooling mode.
10
(Filter must run to test the water temp.)
11
12
1.8
Aviso:
-No introduzca la mano ni otros objetos en la salida de aire ni en el ventilador. Podría dañar la bomba de
calor y ocasionarle lesiones.
-En caso de un funcionamiento anómalo de la bomba de calor, desconéctela inmediatamente de la corriente y
póngase en contacto con un técnico profesional.
Se recomienda encarecidamente colocar un protector alrededor de la unidad para mantener a los niños
alejados de la bomba de calor.
La bomba de calor debe ser conectada a la corriente por un electricista autorizado. (230V 1ph o 400V
3ph)
ImportanteAunque la bomba de calor esté aislada eléctricamente del resto de la unidad, esto
únicamente impide el paso de electricidad hasta o desde el agua de la piscina. Es necesario conectar a la
unidad a una toma de tierra para protegerle a usted mismo de cortocircuitos que puedan producirse
dentro de la unidad. Realice una conexión adecuada a la toma de tierra.
Compruebe si el voltaje de la red eléctrica se corresponde con el voltaje de funcionamiento de la
bomba de calor antes de conectar la unidad.
BOMBA DECALOR
SUMINISTRO ELÉCTRICO
BOMBA
DE
CALOR
SUMINISTRO ELÉCTRICO
230V / 1ph / 50Hz
380-400V / 3ph / 50Hz
35
Para la conexión de la bomba de agua, por favor, instale un contactor CA externo (no incluido en la bomba de calor).
Véase p.176
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Astralpool EVOLine 25M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Astralpool EVOLine 25M in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 19,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info