673144
18
Zoom out
Zoom in
Previous page
1/196
Next page
ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEMASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
© ASTRALPOOL 2015 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
.
Pag:
18
ENGLISH
ENGLISHENGLISH
ENGLISH
This screen enables or disables the possibility to
select SPA as an operation mode.
1) Disabled: the unit will work only on Pool
mode.
2) User Control: The unit will be able to work
on Pool or/and Spa water, user selectable.
3) External Control: The unit will work on
Pool or/and Spa by means of external
terminals, see 5.15. (Page 24).
This screen set the time the unit will stop water
flow during a Pool ↔ Spa change. This time
reflects the time needed for the 3 way valves to
switch from Pool ↔ Spa. It is useful to set a time
slightly larger than required to assure that the
change is complete.
This screen sets the timing when the unit is set to
heat Pool and Spa. In this example, the unit will
heat Spa for 1 hour and then will change to heat
Pool for 3 hours. If temperature setting is
achieved, unit will change immediately.
This screen represents the time lapse between
when the machine should activate and when it
really does. This screen only appears if “Comfort
function” is activated.
Only appears if “Comfort function” is activated.
This screen represents time lapse between water
temperature readings. For instance, when water
temp is within set point, unit will check every 30
min whether water has come out of set point.
Only appears if “
Comfort
function” is activated.
This screen represents time lapse between water
temperature readings in SPA. For instance, when
water temp is within set point, unit will check
every 5 min whether water has come out of set
point.
Depending on the units characteristics 3 ty
pes of
defrost can be selected:
1) Fan stop: By air with fan off.
2) Air + Fan: By air with fan on.
3) Cycle inversion: by hot gas by reversing
the frigorific circuit. (only reversible
machines)
This screen sets the radio channel the unit will use
to communicate with the remote. In order to work
properly, remote has to be set to the same radio
channel.
This screen sets if test mode is enabled. Test mode
is reserved for technicians that need to diagnose
the unit.
SPA Control
Enabled/Disabled
V.SPA Time
50 sec
Mode SPA+POOL
Cycle 1h / 03h
Delay time
02 min
Sample Time
30 min
Sample Time SPA
5 min
Defrost Mode
1 / 2 / 3
Radio Channel
00
Test Mode
ON/Off
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Astralpool ASTRALPOOL HEAT II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Astralpool ASTRALPOOL HEAT II in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info