424615
30
Zoom out
Zoom in
Previous page
1/37
Next page
Choose the downloading source (use the 5 and 6keys, then press OK to enter) :
ALL SATELLITES the search for a downloadable version is run on all the satellites of your
installation
WHOLE SATELLITE : the search for a downloadable version is run on a single satellite which you
will specify (use the 3 and 4 keys, then press OK to enter).
TRANSPONDER : the search for a downloadable version is run on a transponder, the parameters of
which you will need to specify (select the name of the satellite with the 3 and 4 keys, then enter the
frequency, the rate and the polarisation of the transponder on which the download flow is located.
Press OK to enter.
DOWNLOAD PCMCIA : the search for a downloadable version is run on a transponder, the
parameters of which you will need to specify (select the name of the satellite with the 3 and 4 keys,
then enter the frequency, the rate and the polarisation of the transponder on which the download
flow is located. Press OK to enter.
In the first three cases, when the search has been completed, a list of one or several download flows is
displayed in a window. Select the valid flow (use 5 and 6) then start the search with SAVE. This will last
for several minutes, then your appliance will start again.
With the PCMCIA module, after pressing OK, you go directly to the download menu of the module. Then
follow the menus.
12.2 AUTOMATIC DETECTION
While the XENA is on stand-by, the appliance systematically makes a search for download flows compatible with
your appliance. If a new application is detected, you will be notified when you quit the stand-by mode. You can
accept this new application (which will be downloaded automatically during the next stand-by) or choose to
download it at another moment.In this case, use the manual download menus (see 12.1)
13. TECHNICAL SPECIFICATIONS
1. DIGITAL MODULE
1.1. Tuner
Input frequency : 950-2 150 Mhz
Input level : -65dBm/-25dBm
Transmission band : 27/36 Mhz (-3dB)
AFC : +/- 10 Mhz
Input connectors : F Type (IEC 169-24 female)
Impedance : 75 Ohms
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aston xena 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aston xena 2000 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aston xena 2000

Aston xena 2000 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info