531671
15
Zoom out
Zoom in
Previous page
1/31
Next page
15
solder points
2-pin jumper
Clear CMOS
(CLRCMOS1, solder points) (CLRCMOS2, 2-pin jumper)
(see p.7/p.8 No. 11) (see p.7/p.8 No. 12)
Note: CLRCMOS1 and CLRCMOS2 allow you to clear the data in CMOS. The data in CMOS
includes system setup information such as system password, date, time, and system
setup parameters. There are 2 ways for you to clear and reset the system parameters to
the default setup. Please turn off the computer and unplug the power cord, then you may
either short the solder points on CLRCMOS1 by using metal material, e.g., a paper clip for
3 seconds; or you may use a jumper cap to short the pin on CLRCMOS2 for 3 seconds.
Please remember to remove the paper clip or the jumper cap after clearing the CMOS. If
you need to clear the CMOS when you just finish updating the BIOS, you must boot up the
system first, and then shut it down before you do the clear-CMOS action.
FID Jumpers
(FID0, FID1, FID2, FID3, FID4)
(see p.7/p.8 No. 30)
Note: The set of FID jumpers are only for advanced users to adjust the multiplier of CPU. Please
follow the table below to adjust the multiplier of CPU. However, the system will work well
without the adjustment of multiplier. You do not have to adjust the multiplier for normal
usage.
Multiplier FID0 FID1 FID2 FID3 FID4
5x 1-2 1-2 2-3 1-2 1-2
5.5x 2-3 1-2 2-3 1-2 1-2
6x 1-2 2-3 2-3 1-2 1-2
6.5x 2-3 2-3 2-3 1-2 1-2
7x 1-2 1-2 1-2 2-3 1-2
7.5x 2-3 1-2 1-2 2-3 1-2
8x 1-2 2-3 1-2 2-3 1-2
8.5x 2-3 2-3 1-2 2-3 1-2
9x 1-2 1-2 2-3 2-3 1-2
9.5x 2-3 1-2 2-3 2-3 1-2
10x 1-2 2-3 2-3 2-3 1-2
10.5x 2-3 2-3 2-3 2-3 1-2
11x 1-2 1-2 1-2 1-2 1-2
11.5x 2-3 1-2 1-2 1-2 1-2
12x 1-2 2-3 1-2 1-2 1-2
12.5x 2-3 2-3 1-2 1-2 1-2
13x 1-2 1-2 2-3 1-2 2-3
13.5x 2-3 1-2 2-3 1-2 2-3
14x 1-2 2-3 2-3 1-2 2-3
15x 1-2 1-2 1-2 2-3 2-3
16x 1-2 2-3 1-2 2-3 2-3
16.5x 2-3 2-3 1-2 2-3 2-3
17x 1-2 1-2 2-3 2-3 2-3
18x 2-3 1-2 2-3 2-3 2-3
19x 2-3 1-2 1-2 1-2 2-3
20x 2-3 2-3 1-2 1-2 2-3
21x 2-3 2-3 2-3 1-2 2-3
22x 2-3 1-2 1-2 2-3 2-3
23x 1-2 2-3 2-3 2-3 2-3
24x 2-3 2-3 2-3 2-3 2-3
1
1
1
1
1
FID0
FID1
FID2
FID3
FID4
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asrock K7S41GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asrock K7S41GX in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info