737283
5
Zoom out
Zoom in
Previous page
1/24
Next page
Operation
Getting to know your Bowflex
®
SelectTech
®
Dumbbells
The Bowflex
®
SelectTech
®
dumbbells are shipped fully assembled, one dumbbell to a box. After carefully removing the dumbbell
from its box, there are some initial steps that should be taken to familiarize you with the function of the product, and to make sure
that all features of the dumbbell operate correctly.
Do not drop the dumbbell. Dropping the dumbbell will damage the weight plates and/or the locking mechanism, and can
cause the weight plates to disengage (drop) from the handle without warning. This can cause serious injury, and will void
the warranty.
1. After you remove the dumbbell from its protective packaging, inspect the products and packaging material for damage.
2. Push down slightly on the handle assembly to make sure it is fully seated in the base. Rotate each adjustment knob several
full rotations to make sure it turns freely in both directions. Make sure there is a click at each weight increment of the
adjustment knob. This click will help you align the knob correctly to make a weight selection.
3. The weight increments range from 4 to 41 kg (10 lbs to 90 lbs) on both adjustment knobs.
To properly select a given weight (9 kg [20 lbs] for example), rotate both adjustment knobs
until that number (9) is aligned with the arrow located on the outward edge of the Bowflex
®
nameplate (Fig.1).
4. After you make sure that the adjustment knob turns correctly, turn each adjustment so that the
number 4 is aligned with the arrow in the Bowflex
®
nameplate.
5. With both adjustment knobs set to 4, pull the handle straight up from the dumbbell. This will
remove only the handle from the base, and let all of the weight plates stay in the base (Fig.
2). The handle without plates gives the initial weight of 4 kg (10 lbs).
6. You may increase the selected weight by rotating each adjustment knob clockwise.
NOTICE: When you remove the dumbbell from the base or return it to the base, use a vertical
motion, perpendicular to the base. Do not tilt the dumbbell or move it laterally
(parallel to the base) until it is fully clear of the unselected weight plates.
Note: The dumbbell handle and weight plates are symmetrical. The handle is inserted with
either end facing the user, provided that you have selected the same weight number on
both ends of the dumbbell.
Do not lean on the dumbbell handles or use them to support your body weight , such as using
them as a base to perform a push up. Doing so will damage the weight plates and/or the locking
mechanisms, and can cause the weight plates to disengage (drop) from the handle without
warning. This can cause serious injury, and will void the warranty.
Inspect the dumbbells prior to each use. Do not use a dumbbell with worn or damaged parts.
Contact your local distributor for repair information.
There are 17 weight increments:
4 7 9 11 14 16 18 20 23 25 27 30 32 34 36 39 41
10 lbs 15 lbs 20 lbs 25 lbs 30 lbs 35 lbs 40 lbs 45 lbs 50 lbs 55 lbs 60 lbs 65 lbs 70 lbs 75 lbs 80 lbs 85 lbs 90 lbs
Note: Weight increments represent estimated values only. Exact values can vary due to manufacturing variances.
Figure 2
Figure 1
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspire Tigon AIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspire Tigon AIO in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspire Tigon AIO

Aspire Tigon AIO User Manual - German - 1 pages

Aspire Tigon AIO User Manual - Dutch - 1 pages

Aspire Tigon AIO User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info