628507
55
Zoom out
Zoom in
Previous page
1/112
Next page
EF1210 C
OMMAND
S
ET
R
EFERENCE
ASPI Digital -
The Sound of DSP
Technical Support: 404.892.3200 53
EF1210 C
OMMAND
S
ET
R
EFERENCE
The EF1210 Command Set is used to control an EF1210 using an RS-232 remote
control device, such as a touch panel or personal computer. The commands control
enabling and configuring the EF1210’s features.
The EF1210 Command Set also includes messages, which are sent back to the remote
control device. These messages can contain acknowledgment or status messages in
response to EF1210 commands.
This reference describes the syntax of all of the available commands and messages, as
well as the purpose and effects of each of these commands. In short, it provides all
the information necessary to integrate the EF1210 Command Set into a remote con-
trol device.
C
OMMAND
S
YNTAX
The EF1210 commands are short strings of text, which are case sensitive. The com-
mands contain a Device Type and Device ID for specifying an individual device in a
chain of ASPI Digital products on an ASPI Bus, so that commands can be targeted at
a specific unit. They also contain a command name, input channel number (in some
cases), and some data to be used by the command. Each command is terminated with
a carriage return (^M) character.
Device type
The Device Type indicates which ASPI Digital product the command is being sent to.
For the EF1210, the device type is always ‘C’.
Device ID
The Device ID is a two digit decimal number indicating the Device ID number of a
specific device. This is the same Device ID that is set by the rear panel DIP switches
on the EF1210. The Device ID must always have two digits, so if the ID is less than
ten, a leading zero is needed. For example, the Device ID for unit six is ‘06’.
Each EF1210 in a system should have a different Device ID, so they can each be
addressed individually. It’s ok for an EF1210 to have the same Device ID as a differ-
ent ASPI Digital product such as an EF200 Phone Add, because they will be differen-
tiated by the device type.
On the EF1210, the Device ID can be a 2 digit number from 00 to 31
Description Number of Characters Range of Values
Device Type 1 0-9,A-Z,*
Device ID 2 00-31,**
Command Name 1-7 0-9,A-Z
Channel Number 1, if applicable 1-8, A-B, 0-3, *
Command Data 0-32 ASCII characters
Terminator 1 ^M
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspi EF1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspi EF1210 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspi EF1210

Aspi EF1210 Additional guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info