628507
15
Zoom out
Zoom in
Previous page
1/112
Next page
A
DVANCED
I
NSTALLATION
ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 13
14. ASPI B
US
I
N
. Connects to the ASPI B
US
O
UT
of another ASPI Digital device.
15. ASPI B
US
O
UT
. Connects to the ASPI B
US
I
N
of another ASPI Digital device.
16. RS-232 R
EMOTE
C
ONTROL
P
ORT
. Connect this to an optional RS-232 remote
control device, such as a touch panel or personal computer COM port.
17. T
HREADED
H
OLE
FOR
P
OWER
S
UPPLY
C
ABLE
C
LAMP
. Use the provided cable
clamp to clamp the power supply cable to the back panel of the EF1210 for strain
relief.
18. P
OWER
S
UPPLY
I
NPUT
. Connects to the external power supply provided with the
EF1210.
19. M
IC
/L
INE
I
NPUTS
. Connects to microphone at either mic or line level, with or
without phantom power (both selectable with DIP switches).
20. A
MIX
I
N
. Connects to the output of the automixer. This is internally mixed with
AEC A and is output to R
EC
. This is only needed when recording from the
EF1210. See “Playback/Record” on page 22 for a description of the Record and
Playback mixer circuitry. See also ‘T
O
CODEC” (number 26).
21. A
UX
I
N
. Connects to the output of a tape recorder, VCR, or other recording
device. Playback from a program audio device is only available with the Refer-
ence A input signal. See “Playback/Record” on page 22 for a description of the
Record and Playback mixer circuitry.
22. AEC A R
EF
I
NPUT
. Connect to the output of a CODEC or hybrid connected to
Zone A.
23. AEC B R
EF
I
NPUT
. Connect to the output of a CODEC or a hybrid connected to
Zone B.
24. L
INE
O
UTPUTS
. Connect to the inputs of an automixer or matrix mixer.
25. R
EC
. Connects to a recording device. R
EC
requires taking the output from the
automixer (or an output of a matrix mixer) and plugging that back into the
EF1210 so that the local side of the conference can be recorded. See “Playback/
Record” on page 22 for a description of the Record and Playback mixer circuitry.
26. T
O
C
ODEC
. Connects to the CODEC. When the output of the automixer is
plugged in to A
MIX
I
N
, the T
O
C
ODEC
signal is a mix of the A
MIX
I
N
and A
UX
I
N
signals. This is only needed when you want to add a Playback signal to the auto-
mixer output before it is sent to the CODEC. See “Playback/Record” on page 22
for a description of the Record and Playback mixer circuitry.
27. Z
ONE
A. Connects to an audio amplifier or powered loudspeaker in Zone A.
28. Z
ONE
B. Connects to an audio amplifier or powered loudspeaker in Zone B
(optional).
Caution!
Use only the power supply provided with the EF1210. Use
of other power supplies will void the warranty and may
cause damage.
Note.
A
MIX
I
N
must be a 0 dBu signal.
Caution!
Set mixer inputs to 0 dBu line level, phantom power OFF.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspi EF1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspi EF1210 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspi EF1210

Aspi EF1210 Additional guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info