474714
24
Zoom out
Zoom in
Previous page
1/36
Next page
Error messages
If an error occurs during the program a message
is shown on the display. To exit the message after
taking measures, turn the machine off and then
back on.
The error messages that may be shown in the
display are:
Close the door
Close the washer door and the program will start.
Overfilling
1.
Shut off the water tap.
2.
See "Drainage error".
Drainage error
Check:
that no objects are stuck in the drainage hose
outlet.
that the drainage pump is not blocked by
foreign objects. Clean the pump. See the "Care
and cleaning" chapter.
that there are no kinks in the drainage hose.
After taking measures, run the Drain program or
press the Door opening button (key symbol) to
empty the machine. If this does not resolve the
problem, call the service division.
Water inlet fault
Check:
that the tap on the water pipe is open.
that the filter in the machine’s water inlet is not
blocked.
Action:
1.
Shut off the water tap.
2.
Unscrew the hose.
3.
Clean the filter in the inlet valve on the
machine.
4.
Screw the hose back on.
5.
Turn on the tap and check for leaks.
6.
Run the program again to check if the fault is
fixed.
7.
If this does not resolve the problem, call the
service division.
Door opening fault
Call the service division!
Wash motor fault
Call the service division!
Imbalance
The machine stops the spin cycle if there is too
much imbalance. The washing machine restarts
the spin cycle and hopefully the washing is better
distributed in the drum. This procedure can be
repeated up to 10 times. If the machine still fails
to find a good balance, the program jumps to the
next step.
The error message requires no action.
24
Troubleshooting
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko W6984 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko W6984 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko W6984

Asko W6984 Installation Guide - English, Dutch - 12 pages

Asko W6984 User Manual - Dutch - 32 pages

Asko W6984 Installation Guide - Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info