474715
27
Zoom out
Zoom in
Previous page
1/32
Next page
Positioning the washing machine
The washing machine can be installed as a
built-in or freestanding unit. Position the
machine so that the electrical plug is easily
accessible.
A. Built-in
The washing machine can be installed under
a bench top with a working height of 870 - 900
mm. Leave 20mm around the whole machine,
particularly between the rear edge of the top
cover and the wall behind it.
B. Freestanding
The washing machine can be positioned
beside or under a dryer.
Adjusting the feet
Keep the noise that the machine produces to
a minimum by adjusting the feet so that the
machine is steady and balanced on the floor.
Tighten the lock nuts.
Locking nut
Connection to water supply
Water connection should be carried out by a
qualified professional. Connect the machine
using the accompanying supply hose. Water
pressure should be 0.1–1MPa (approx.
1–10kp/cm2 ; 10-100N/cm2). There should
be a stopcock or tap on the water pipe.
If the pipes are newly installed, it may be wise
to flush them through so that any dirt is
washed away. Otherwise, dirt can clog the
filter in the machine’s water intake and cut off
cut off or reduce water flow to the machine.
Check for leaks.
Only use the inlet hose supplied with the
machine. Do not reuse old or other loose inlet
hoses.
27
Installation
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko W6983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko W6983 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info