495979
20
Zoom out
Zoom in
Previous page
1/36
Next page
7
Close the washer door and
press the Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is displayed. This may
differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous wash with the same
program, "0:01" will be displayed until the program
finishes. This is normal! The next time you use
the program under similar conditions, the
estimated program time will be more accurate.
To add or remove laundry after the
program starts
If you want to add or remove items after the
program has started, you can stop the program
by pressing and holding the Door Opening button
(key symbol) for three seconds. The program time
flashes on the display. When you restart the
machine, add any extra detergent needed and
close the washer door. The machine continues
automatically from the point where the program
was interrupted.
Stopping or changing a program
You can stop a program by pressing the
Start/Stop button for three seconds. To restart the
machine, select a new program, add any extra
detergent needed, and press the Start/Stop
button.
Note!
Do not open the detergent compartment while
the machine is running.
8
Once the program has finished
Once the program has finished, "End"
appears on the display.
The washer door opens automatically once the
program has finished. If you want to deactivate
the Automatic Door Opening function, see the
"Selecting settings" section.
Remove the laundry.
Turn off the main power switch as this
will save energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash program finishes the
display backlighting enters energy saving mode.
Customer Care Center20
1-800-898-1879
www.askousa.com
Operating instructions
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko W6424 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko W6424 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info