Built-in installation
ASKO washers can be installed beneath a
cabinet or worktop with a height of 34½" (876
mm) or in a closet. There must be a gap of
about ½" (12 mm) all around the machine,
including between the rear edge of the ma-
chine's top panel and the back wall. The
opening width must be at least 24½" (622
mm). Space must also be available for the
inlet and drain hoses. See the illustration be-
low for measurements and positions. If the
washer is installed in a closet the door shall
be opend while the washer is running.
If the drain outlet is higher than 24"(610 mm),
the connections will need to be recessed.
Program plate in multiple languages
Certain machines include double-sided pro-
gram plates in different languages (see the
detergent compartment and the bag with the
user handbook that comes with the machine).
You can replace or reverse the card to show
the language most appropriate for you.
To remove the card from its holder in the de-
tergent compartment, press the card with your
thumb and push it sideways (see illustration).
The card will then bend slightly and you can
easily remove it. To fit the card, bend it
slightly in order to easily insert it into the
holder in the detergent compartment.
Customer Care Center30
1-800-898-1879
www.askousa.com
Installation instructions
