312374
14
Zoom out
Zoom in
Previous page
1/28
Next page
6
Select options and settings
By changing options and settings you
can adjust the washing program to suit
your own specific requirements.
The machine will remember which settings
and options you choose for each program
and uses these (with the exception of Delayed
Start) the next time you select the program in
question. Of course, you can change the
options if you want.
Temperature
Select temperature by pressing the
Temperature button until the red field lights
up beside the desired temperature.
You can select temperatures between 30 °C
and 95 °C or Cold. If you select Cold, the
washing temperature will be the same as that
of the water coming into the machine.
For Wool/Hand it is not possible to select a
temperature higher than 40 °C. See the table.
Spin speed/No spin/No draining
Select the spin speed by pressing the Spin
button until the red field next to the spin speed
you want lights up.
You can select speeds between 400 and
1400 rpm, No spin or No drain.
Spin at 800 rpm always signifies short spin.
A spin between 400 and 800 rpm is always a
short spin.
For certain programs, it is not possible to
select a speed in excess of 800 rpm (see
table).
No spin means that the program does not
include a spin cycle and ends by draining.
No drain means that the program does not
include a spin cycle and ends with the water
from the final rinse still in the machine. The
washing will remain in the water from the final
rinse and therefore will not become creased.
In order to remove the washing from the
machine, select either a Spin or Drain
program or press the Door opening button
(key symbol) to drain the water from the
machine.
Super Rinse
Selecting Super Rinse gives you 2 extra
rinses. This option cannot be selected with
Wool/Hand, the Rinse program, Spin or Drain.
The machine will remember this setting and
use it the next time you select the program in
question. To deactivate Super Rinse, press
the Start/Stop button for 3 seconds. The red
field will go out.
A lit red field around the button indicates that
the option has been activated.
High water level
High water level can be selected in all
programs except the Hand/Wool, Spin and
Drain. High water level means additional
water during the main wash and rinse cycles.
A lit red field indicates that the option has
been activated.
14
Washing
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko w 6342w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko w 6342w in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko w 6342w

Asko w 6342w User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info