309039
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
FAULT INDICATION
Faults that occur while a program is running
will be indicated by the program knob moving
to its position C or S at the end of the program
or when it is interrupted.
Knob moves to position S at end of program or
when interrupted
This indicates motor fault or level sensing error
during the program. Phone service.
Knob moves to position C at end of program or
when interrupted
This indicates that an error occured during the
program. Before calling for service, check to see
whether the fault is due to something that you
can put right yourself. Proceed as follows:
•1 Is power supply broken? Check fuses. If you
replace a fuse, run program 7, Super quick wash,
at 60°C without load, ie, to check that the fault
has been corrected.
•2 If there is water remaining in the machine.
Make sure that the Spin knob is not in
position. Then run program 10, Drain. If the
water is not pumped out, phone service.
•3 Is the machine drained or have you drained
the machine according to item 2 above? Set the
knob to zero, ie, pointing straight up, and open
the door.
If the washing is not wet, after the program is
interrupted, the machine has obviously not ta-
ken in water. Check the following:
- water is open.
- strainer in the water intake is not clogged. If it
is clogged, proceed as follows:
1. Turn off the water tap.
2. Disconnect the hose.
3. Clean the strainer in the water intake of the
machine.
4. Re-connect the hose.
5. Open the water tap.
6. Run the program again to check that the
fault is remedied.
If the washing is wet, but not spin-dried, check
the following:
- The machine incorporates an out-of-balance
detector, which reduces spin speed or prevents
spinning from starting if the load is very unba-
lanced. Open the door and redistribute the
washing. Start again by selecting the Short spin
program.
- Check the drain hose and the drain pump.
1. Straighten out any kinks in the drain hose.
2. Is there anything stuck in the drain hose out-
let? Clear the hose.
3. Is the drain pump blocked by foreign ob-
jects? Clear the pump, see Chapter 10, Care
and cleaning.
If the knob still moves to position C, despite
the above measures being taken, phone service.
Downloaded from www.Manualslib.com manuals search engine
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko w 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko w 620 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko w 620

Asko w 620 User Manual - English - 2 pages

Asko w 620 User Manual - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info