309039
14
Zoom out
Zoom in
Previous page
1/36
Next page
Page 14
The Delayed Start MenuThe Delayed Start Menu
This menu lets you set a delayed start from 1 to 12
hours. This means you can set the washer to start at
the most convenient time for you, such as an hour before
you arrive home from work. This feature is also useful
in areas where utility companies offer discount rates
during certain hours.
Select time
for delayed start
< - + >
P1
Menu Enter
0
1. Use the Arrow buttons to increase or decrease the
delay time. (The numbers indicate hours.)
2. When the number of hours you want to delay starting
the machine displays, press ENTER. The LED will
display the delay start time.
Press MENU to advance to the next menu.
The Options MenuThe Options Menu
This menu lets you set several options. Only the options
available with the wash program you selected will display.
(See ”The Program Menu” table on page 11.)
rpm
1600
0
Menu Enter
Select
options
Pre-soak
< Off >
P1
1. On this menu, you press ENTER to advance through
the options, rather than pressing MENU.
2. Press an Arrow button to toggle between Off and On.
3. When your preference displays, press ENTER. The
LED will display the new options. Continue to press
ENTER until the LED displays your new program.
RESTORING A PRESETRESTORING A PRESET
PROGRAMPROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want
to restore and hold it down while your press ENTER.
The program will revert to its original settings.
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER five times in succession then press
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press an Arrow
button to advance through the menu to the desired
language.
4. Once the correct language displays, press ENTER
to program the LED window to display the language
you selected.
CHANGING CHANGING THE THE TEMPERATEMPERATURETURE
READOUT ON THE LED WINDOWREADOUT ON THE LED WINDOW
FROM CELSIUS TO FAHRENHEITFROM CELSIUS TO FAHRENHEIT
You can change the temperature readout on the LED
window from Celsius to Fahrenheit and vice versa. To
do this follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER five times in succession then press
P2 five times. (This must be done within 15 seconds.)
3. When the Temperature menu displays, press an
Arrow button to toggle between Fahrenheit and
Celsius.
4. When your preference displays, press ENTER to
program the LED window to display the temperature
reading you selected.
CHILD-SAFE STCHILD-SAFE STARART (W640/W660)T (W640/W660)
As a safety measure, you can program the W640 and
W660 not to start unless the START button is held down
for three seconds. To do this, follow the steps below:
1. Turn the machine off then on.
2. Press ENTER five times, then press P3 five times.
(This must be done within 15 seconds.)
3. “Delayed start” displays with “0” flashing in the lower
right corner. Press the right Arrow button to toggle
the display to “3.”
Child-Safe Menu ButtonChild-Safe Menu Button
Please note that when you set the child-safe Start button,
the Menu button is automatically programmed to delay
for three seconds before it becomes active. This prevents
a child from accidentally changing the program settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the 3-second
delay) until you have completed your changes. If it is not
pressed for two minutes, it will automatically revert back
to the child-safe mode.
English
French
Spanish
Portuguese
Italian
German
Swedish
Danish
Norwegian
Netherlands
Finnish
CHANGING CHANGING THE LANGUTHE LANGUAAGEGE
ON THE LED WINDOWON THE LED WINDOW
There are eleven languages available for the LED
window:
NOTE:
If you change the P3 program then decide to
restore its original settings, after pressing P3
and ENTER, you must go into the Options
menu (see page 14) and turn off Short Spin.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko w 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko w 620 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko w 620

Asko w 620 User Manual - English - 2 pages

Asko w 620 User Manual - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info