565686
23
Zoom out
Zoom in
Previous page
1/36
Next page
How to assemble the stacking kit:
1. Undo the anti-tip device.
2. Remove the two screws indicated on the
back of the washing machine.
3. Secure the anti-tip device using the screws
as shown in the picture.
4. Attach the plastic cups for mounting the
tumble dryer’s front feet to the washing
machine’s top cover. This is essential, as
only when the tumble dryer’s feet are rest-
ing in the plastic cups can you be sure that
the dryer is correctly positioned on the
washing machine.
Break off tab A on the cup fitted on the right
side and tab B on the cup fitted on the left
side. Then remove the paper from the self-
adhesive surface under the plastic cups.
A
B
5. Fit the plastic cups so that the "tags"
marked with arrows are against the front
edge or side edge of the cover and press
them firmly onto the cover. Then break off
the remaining tabs.
6. Push out the knock-out hole on the back
of the dryer (you don't have to completely
remove the knockout, just fold it up far
enough for the stacking bracket to fit inside
the slot) using a hammer and screwdriver.
7. Push the tumble dryer in under the metal
brackets. At the same time, keep the front
edge raised by 0.4" (10mm) to 0.8"
(20mm).
8. Lower the tumble dryer’s front feet into the
plastic cups and adjust the dryer to ensure
that it is balanced.
23Customer Care Center
1-800-898-1879
www.askousa.com
Installation instructions
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko T793 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko T793 in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info