565666
14
Zoom out
Zoom in
Previous page
1/60
Next page
14
English
Electrical installation
LINE SERIES™-CLASSIC
1. Turn off the machine using the main power
switch.
2. Press and hold the ”Temperature button”
and then switch on the Main power switch.
3. If the upper right LED by the programme
selector and the LED by the “Temperature”
button
are lit then the machine is set
for 10A and 1950W. If both the upper and
lower right LEDs by the programme selector
and the LED by the “Temperature” button
are lit then the machine is set for 16A
and 2500W. Press the “Anti crease” button
2h
once to switch the heat output.
4. Press the Stop button to save.
1. Turn off the machine using the main power
switch.
2. Press and hold the ”Anti crease button”
2h
and then switch on the Main power switch.
3. If the upper right LED by the programme
selector and the LED by the “Anti crease”
button
2h
are lit then the machine is set
for 10A and 1950W. If both the upper and
lower right LEDs by the programme selector
and the LED by the “Anti crease” button
2h
are lit then the machine is set for 16A
and 2500W. Press the “Time saver” button
once to switch the heat output.
4. Press the Stop button to save.
LINE SERIES™-LOGIC
1. Turn off the machine using the main power
switch.
2. Press and hold the ”Temperature button”
and then switch on the Main power switch.
3. Turn the programme selector and choose
between “Heater 2 On” (2500W/16A) and
Heater 2 Off” (1950W/10A).
4. Press the Start button once to save your
selection. The machine returns to the pro-
gramme menu.
Switch-over
It is possible to switch between 10A (heat output 1950W) and 16A (heat output 2500W). The
switchover must be performed by a qualifi ed electrician. Below we describe how to do this for
each model.
LINE SERIES™-STYLE
Fully built-in machine
1. Turn off the machine using the main power
switch.
2. Press the Stop button and switch on the
machine with the Main power switch. Then
press the Stop button 5 times within 10
seconds.
3. Press the up or down arrow button
and choose between “Heater 2 On”
(2500W/16A) and “Heater 2 Off
(1950W/10A).
4. Press the Start button once to save your
selection. The machine returns to the pro-
gramme menu.
The electrical wall socket must be placed
outside of the installation area to be easily
accessible.
The machine must only be connected to an
earthed wall socket.
Any residual current devices must be type
A.
Connection on delivery
Information about the electrical connection
can be found on the type plate. Compare the
data with the mains supply data.
Type plate
Standard machine
1. Turn off the machine using the main power
switch.
2. Press the Stop button and switch on the
machine with the Main power switch. Then
press the Stop button 5 times within 10
seconds.
3. Turn the programme selector and choose
between “Heater 2 On” (2500W/16A) and
Heater 2 Off” (1950W/10A).
4. Press the Start button once to save your
selection. The machine returns to the pro-
gramme menu.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko T754C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko T754C in the language / languages: All languages as an attachment in your email.

The manual is 37,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko T754C

Asko T754C User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info