495987
11
Zoom out
Zoom in
Previous page
1/63
Next page
TD 92319GB
2006-09-22/ Ver. B
User Manual
Ascom i75 VoWiFi Handset
5
As the handset cannot distinguish between a Desktop Charger and Charging Rack, it is
recommended that the alert signal is silenced when placed in a rack. It can be set in the
“In charger” profile, see 9.6.2 Change Profile Settings on page 43.
2.3 Icons and Text in the Display
The icons and text in the display indicate functions and settings to which you have access.
The display normally shows date and time, the owner ID and telephone number. The
owner ID can manually be set by the user.
Figure 4. Example of a display configuration in stand-by mode.
In stand-by mode the upper row is used for icons. Three rows are used for information.
The first row shows the date and time and the second row is used for user information.
The user information in stand-by mode can be set by the user. The third information row is
used for showing the alarm icons and status of the handset. Examples of status
information are; muted, in charger etc. When there is no status to show the row is empty.
The bottom row (under the line) is the Soft key field. In stand-by mode it shows the user
defined names of the three Soft keys beneath the display. In menu mode where the Soft
keys are used for different choices, it gives you the function of each Soft key. Examples of
functions are; Select, Back, Option, Save etc.
Figure 4.
The “Off-hook” icon indicates that your handset is off-hook.
The “Audio signals off” icon is shown when all alert signals,
including ring signal, message tone, key beep etc. are turned off.
High priority messages will however override this setting.
The “Signal strength” icon is always shown in the display in stand-
by mode. The level indicators decreases when the signal strength
becomes weaker.
The “Battery” icon is always shown in the display in stand-by mode.
When the level is low it is time to charge the battery.
The “Loudspeaking on” icon is shown when it is possible to use the
loudspeaking function.
The “Loudspeaking off” icon is shown when the loudspeaker is
activated.
Icon row
User information
Menu Assist Doctor
Shows the Soft keys function:
User defined in stand-by mode
Status information, i.e. current mode,
and alarm icons
Apr 30 10:36am
Elisabeth 23654
}
}
}
}
Silent
}
Time and date
004
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascom i75 VoWiFi Handset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascom i75 VoWiFi Handset in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info