495986
97
Zoom out
Zoom in
Previous page
1/97
Next page
TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
93
6 When barcode reader is found, press "Pair".
7 If needed, enter PIN code, see user manual for the Bluetooth barcode reader. Press
"OK".
8 The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth barcode reader will also be connected indicated by the icon in front of
the barcode reader.
B.4.3 Add another Bluetooth Barcode Readers
Up to four Bluetooth barcode readers can be paired to the handset, but only one at a time
can be selected.
Note: Maximum four Bluetooth devices (headset/barcode reader) can be paired
simultaneously.
To pair another Bluetooth barcode reader, repeat section B.4.2 Pair and Connect a Bluetooth
Barcode Reader on page 92.
The paired Bluetooth barcode readers are displayed by a default name in the handset menu
“Barcode reader ”. See B.4.6 Change the name of Bluetooth Barcode Reader.
B.4.4 Select a Bluetooth Barcode Reader
To activate a Bluetooth barcode reader, enter in the handset menu, select “Bluetooth”
> “Barcode reader”. Step with the navigation key, or to the barcode reader to be
selected and press the soft key "Select". "Connection successful" is displayed. The barcode
reader is now selected.
When a new barcode reader has been selected, any previous barcode reader will
automatically become disconnected.
B.4.5 Remove a Bluetooth Barcode Reader
To remove a Bluetooth barcode reader, enter in the handset menu, select "Bluetooth" >
"Barcode reader". Step with the navigation key, or to the barcode reader to be removed
and press the soft key "More". Select "Delete". Confirm with the soft key "Yes".
B.4.6 Change the name of Bluetooth Barcode Reader
In the barcode reader list, the name of the barcode reader is the default name for the
barcode reader.
To change the name, enter in the menu, select “Bluetooth” > “Barcode reader”. Step
with the navigation key, or , select the barcode reader. Select "More" > “Edit name”. See
3.5 Alphanumeric Keys on page 16.
B.5 Barcode Reader Operation
B.5.1 Using the Bluetooth Barcode Reader
The procedure on how to use the Bluetooth barcode reader may vary depending on which
type/model that is used. Refer to the manual for the Bluetooth barcode reader. The
following instruction can be used as a guideline.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascom d62 DECT Handset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascom d62 DECT Handset in the language / languages: English as an attachment in your email.

The manual is 9,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info