637173
5
Zoom out
Zoom in
Previous page
1/10
Next page
WHEEL SIZE CALCULATION
If your specific tire size is not listed in the chart, fol-
low these steps to measure wheel circumference.
See Figure 2.
STEP 1
Stand your bicycle upright. With your tire inflated to its
proper pressure, rotate your front wheel so that the
valve is located at the bottom (6 o’clock position).
Make a mark on the floor to indicate the valve location.
STEP 2
Roll the bicycle forward in a straight line for one com-
plete wheel revolution, until the valve is again at the
bottom (ideally, you should be on the bike). Make a
mark on the floor to indicate the valve location.
STEP 3
Measure the distance between the marks in millime-
ters (1 inch = 25.4mm). This value is your wheel cir-
cumference. Enter this value in the computer (see
“Programming Wheel Size”).
1x
Distance in mm / inch
PROGRAMMING WHEEL SIZE
The default wheel size setting is 2124mm. After
determining your wheel size as described above,
enter the value in the computer.
STEP 1
In either display screen press and hold both buttons
(LEFT and RIGHT) for 3 seconds to access the
wheel size programming screen. The digit at the right
of the screen will flash. Use the RIGHT button to
adjust the value.
STEP 2
Press the LEFT button to confirm the value and
FIGURE 2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascent 4LW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascent 4LW in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info