736692
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
No oil pressure:
Too little engine oil.
Check engine oil level, refill.
No oil pressure:
Slope too steep.
Bring the device to a level position.
Poor quality, dirty, or old fuel. Clean fuel system (authorised service
centre).
Always use fresh fuel.
Engine starts badly or
runs irregularly
Choke is closed. Open choke (see chapter Starting).
Air filter is dirty. Maintain air filter (see chapter Mainten-
ance).
Poor quality, dirty, or old fuel. Always use fresh fuel.
Spark plug is dirty, damaged, or
incorrect electrode gap.
Clean spark plug and check electrode
gap (see chapter Maintenance). Re-
place spark plug if necessary.
Device does not
move
The drive is unlocked. Lock the drive.
Hydrostatic drive is overheated. Cool down (see chapter Maintenance).
Blade cannot be en-
gaged
Lever for cutting height adjust-
ment in transport position.
Lower lever for cutting height adjust-
ment to the desired cutting height.
The blade does not
rotate
V-belt is insufficiently tensioned
or damaged.
Authorised service centre.
Bowden cable is defective. Authorised service centre.
Strong vibrations dur-
ing operation
Imbalance of the blade caused
by incorrect sharpening or
chips on the blade.
Have blade resharpened and balanced
by an authorised service centre. Re-
place a damaged blade immediately.
Blade drive shaft is bent due to
collisions with foreign objects.
Authorised service centre.
Engine fastening is loose. Authorised service centre.
Blade fastening is loose. Authorised service centre.
Irregular noises Loose fastening elements. Authorised service centre.
Muffler is defective. Authorised service centre.
Hydrostatic drive is overheated. Cool down (see chapter Maintenance).
Engine is smoking Air filter is dirty or drenched
with oil.
Maintain or replace air filter (see
chapter Maintenance).
Oil level is too high. Have authorised service centre lower
the oil level to the marking.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4WD in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4WD

AS Motor AS 940 Sherpa 4WD User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info