736693
26
Zoom out
Zoom in
Previous page
1/48
Next page
26
Maintenance
Warning
Risk of injury due to unexpected movement.
When inspections are carried out, the
device can move unexpectedly.
Make sure that no persons or objects are
in the danger area of the blade.
Make sure that no further hazards result
from an unexpected movement.
Warning
Risk of injury during maintenance and
cleaning work when the engine is running.
Perform maintenance tasks only then
with a running engine if this is required in
the Maintenance table.
Warning
Danger of poisoning due to poisonous ex-
haust gases.
Do not operate the engine in closed or
insufficiently ventilated rooms.
Please observe the safety instruction re-
garding the poisoning risk.
Prior to all maintenance and cleaning work
when the engine is not running:
1. Let the device cool down for at least
20minutes.
2. Close the fuel valve and the tank ventila-
tion.
3. Disconnect the negative pole of the bat-
tery.
Improper maintenance can make the device
unsafe for operation and result in accidents.
Regular maintenance keeps your device ready
for use.
Service the device according to the following
maintenance instructions.
Contact an authorised service centre if prob-
lems during maintenance occur or if you de-
termine deficiencies during one of the following
inspections.
Maintenance and cleaning position
Warning
Risk of injury due to the heavy weight of the
device. The device can fall over and fall
down and cause severe injuries.
Observe the following notices.
To perform maintenance, repair or cleaning
tasks at the bottom of the device, you can lift or
tilt the device.
Lift the device only when on level and firm
terrain.
Use only lifting gear or ramps that are suit-
able for the weight of the device.
Attach the lifting gear only to the main frame
because only the main frame can carry the
weight.
Secure the device always against tilting, fall-
ing down or slipping.
Do not stay in the tilting area of the device.
Do not tilt the device more than indicated in
the safety instructions regarding driving on
the slope. Otherwise the device can tilt and
the device can be damaged or contamina-
tions can occur due to leaking fluid.
Do not carry out tasks that can result in tilt-
ing, falling down or slipping of the device.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4WD Adventure at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4WD Adventure in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4WD Adventure

AS Motor AS 940 Sherpa 4WD Adventure User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info