736688
43
Zoom out
Zoom in
Previous page
1/52
Next page
43
No oil pressure:
Slope is too steep.
Bring the device to a level position.
Poor quality, dirty, or old fuel. Clean fuel system (authorised service
centre).
Always use fresh fuel.
Engine starts badly or
runs irregularly
Choke is closed. Open choke (see Starting the device).
Air filter is dirty. Maintain air filter (see Maintenance).
Poor quality, dirty, or old fuel. Always use fresh fuel.
Spark plug is dirty, damaged, or
incorrect electrode gap.
Clean spark plug and check electrode
gap (see Maintenance). Replace spark
plug if necessary.
Device does not
move
The drive is unlocked. Lock the drive.
Hydrostatic drive is overheated. Cool down (see Maintenance).
The blade does not
rotate
Lever for cutting height adjust-
ment in transport position.
Lower lever for cutting height adjust-
ment to the desired cutting height.
Electromagnetic clutch has in-
sufficient voltage.
Let engine run for some time at medium
speed or charge battery.
V-belt is insufficiently tensioned
or damaged.
Authorised service centre.
Strong vibrations dur-
ing operation
Unbalance at the blade caused
by incorrect sharpening or
chips on the blade.
Have blade resharpened and balanced
by an authorised service centre. Re-
place a damaged blade immediately.
Blade drive shaft is bent due to
collisions with foreign objects.
Authorised service centre.
Engine fastening is loose. Authorised service centre.
Blade fastening is loose. Authorised service centre.
Irregular noises Loose fastening elements. Authorised service centre.
Silencer is defective. Authorised service centre.
Engine is smoking Air filter is dirty or drenched
with oil.
Maintain or replace air filter (see Main-
tenance).
Oil level is too high. Have authorised service centre lower
the oil level up to the marking.
Engine gets hot Ventilation grid is dirty. Clean ventilation grid.
Oil level in the engine is too
low.
Refill engine oil (see operating instruc-
tions of the engine manufacturer).
Cooling fins of the engine are
dirty.
Have cooling fins cleaned by authorised
service centre.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 915 Enduro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 915 Enduro in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 915 Enduro

AS Motor AS 915 Enduro User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info