736709
19
Zoom out
Zoom in
Previous page
1/40
Next page
19
3. Slowly move the drive lever to the desired
driving direction. The further the lever is
moved away from the neutral position, the
faster the mower moves.
4. To stop, move the drive lever slowly to
neutral position or step on the foot brake.
Reversing
Always reverse slowly. Be especially cautious
when the blade is engaged.
The special shape of the guide of the drive
lever serves for preventing accidental switch-
ing from moving forward to reversing.
1. Release the parking brake.
2. Slowly move the drive lever to the rear. The
more you move the lever away from the
neutral position, the faster the mower
moves.
3. To stop move the drive lever slowly to neut-
ral position or step on the foot brake.
Differential lock (if existing)
The differential lock connects the two rear
wheels rigidly to each other. This improves
traction. Actuate the differential lock when a
wheel slips.
Always actuate the differential lock when mov-
ing downhill. This improves the driving stability
of the device. The risk of sliding or swerving of
the rear is reduced and safe braking is pos-
sible.
Driving in curves while the differential lock is
actuated is only possible with limitations.
To avoid excessive wear,
actuate the differential lock only when the
device is stopped, if possible.
always step on the pedal all the way.
release the differential lock when it is no
longer absolutely needed.
Switching off and parking
Warning
Risk of injury in case of unauthorised use.
Always remove the ignition key when
you do not use the device.
1. Move the drive lever slowly to neutral pos-
ition.
2. Turn the accelerator lever to idle speed.
3. Switch off the blade clutch.
4. Move the lever for the cutting height ad-
justment to transport position.
5. Actuate the parking brake.
6. Turn the ignition key to “ignition off”.
7. Wait for the engine to stop completely be-
fore you step away from the device.
8. Pull off the ignition key.
9. Close the fuel valve.
Transport
Transport the device on a freight vehicle or a
trailer which is designed for a carrying capacity
of at least as great as the empty weight of the
device.
Transport on pallets
For transport over short distances, use a fork
lift or a lift truck.
For longer distances, load the device with a
fork lift onto a freight vehicle or trailer.
The user must be authorised to operate a fork
lift. When the machine is lifted, all persons
must step away from the working area of the
fork lift.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 799 Rider at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 799 Rider in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 799 Rider

AS Motor AS 799 Rider User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info