Manual AS Motor AS 799 Rider (page 12 of 40) (English)

736709

Zoom out

Zoom in

1/40

When work is completed

After mowing, always close the fuel valve.

Prior to leaving the device, wait until the motor

comes to a standstill and pull off the ignition

key.

After switching it off, let the device cool down

for at least 20 minutes before you store it in a

dry, closed, sufficiently ventilated room.

Never store the device when there is fuel in the

tank inside a building where fuel vapours might

come into contact with open fire or sparks.

Hydraulic components

The device contains hydraulic components.

In case of improper repair or damage to the hy-

draulic components, pressurised hydraulic fluid

may leak. The fluid may enter the skin and

thus cause severe injuries.

– Only carry out maintenance work as de-

scribed in these operating instructions.

– If hydraulic fluid has entered your skin, con-

tact a doctor immediately.

Use caution during maintenance

and repair

Only carry out work as described in these op-

erating instructions. Have an authorised ser-

vice centre perform all other work.

Only use the blades and spare parts author-

ised by “AS-Motor Germany”. Unauthorised

blades and spare parts can cause severe injur-

ies.

Prior to all maintenance work, wait until the en-

gine comes to a standstill and pull off the spark

plug connector.

We explicitly point out that, in accordance with

the Product Liability Act, we are not liable for

damages that were caused by our devices if

– worn or damaged parts were not repaired or

replaced on time.

– these damages were caused by improper

repair.

– when changing a part, our original parts or

parts authorised by us were not used.

– the repair work was not carried out by an au-

thorised service station.

The same applies for spare parts and

accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 799 Rider in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 799 Rider

AS Motor AS 799 Rider User Manual - German - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AS Motor AS 799 Rider Manual

Product: