736673
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
The material weakens, can suffer cracks, en-
dangering people and material assets. Ejected
broken pieces can cause severe injuries.
Unusual vibrations are an indication that
blades are missing or broken,
the blade is worn excessively or on one side
or
damage to the engine or cutter deck fasten-
ing.
Blade change
1
1
2
2
It is absolutely necessary to change the blade:
When one of the wear markings(1) was
reached. Original blades are engraved with
wear markings (marking in form of a ball-
shaped imprint on the rear side of the
blade).
When the thickness of the blade at the rear
edge of the vane(2) or at another point is
below 1mm (exception: cutting edge).
Original blade
An original AS-blade is engraved with:
AS XXXXXXXX
The engraving shows the spare part number.
Checking the blade clutch
Check the blade clutch for proper function by
disengaging the blade. The blade must come
from full speed to a standstill in less than
7seconds. Contact an authorised service
centre if this is not the case.
Maintenance specifically for
4-stroke device
Maintaining the engine
Warning
If the speed of rotation is set too high, ob-
jects can be ejected. The engine can be
damaged and noise pollution increases.
Do not change the basic setting of the
carburetor or the speed control.
The engine manufacturer has prepared the op-
erating manual of the engine. The manual con-
tains all maintenance requirements and war-
ranty conditions for the engine. If warranty
work at the engine is required, contact your au-
thorised service centre or the next authorised
dealer for engines.
To ensure a long service life of the engine, suf-
ficient engine cooling is required.
Keep the
- engine cover (ventilation grid),
- silencer (protective grid) and
- cooling fins of the engine
clean at all times.
Checking the engine oil level
Never allow the oil level to be too low other-
wise the engine can be damaged. Never fill in
too much oil. Otherwise, there is the risk that
the oil enters and destroys the air filter.
For this, observe the attached operating in-
structions of the engine.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 73 4T B S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 73 4T B S in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 73 4T B S

AS Motor AS 73 4T B S User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info