736670
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
Maintenance specifically for
2-stroke device
Maintaining the engine
Warning
If the speed of rotation is set too high, ob-
jects can be ejected. The engine can be
damaged and noise pollution increases.
Do not change the basic setting of the
carburetor or the speed control.
To ensure a long service life of the engine, suf-
ficient engine cooling is required.
Keep the
- engine cover (ventilation grid),
- silencer (protective grid) and
- cooling fins of the engine
clean at all times.
Checking the spark plugs
Danger
The ignition system generates an electro-
magnetic field.
Wearers of pacemakers must not work
on live parts.
Soiled spark plugs reduce the engine output.
Clean the electrode of the spark plug with a
brass wire brush. Check the electrode gap
(see “Technical data”). Make sure that the in-
sulator around the electrode is not damaged.
Never use a damaged spark plug.
Tighten the spark plug with the torque indic-
ated in the technical data.
Maintaining the air filter
Warning
Cleaning agents pose a fire and explosion
hazard.
Never clean the air filter with flammable
solvents.
Notice
A cleaning of the air filter with compressed
air damages the filter fabric and the air filter
becomes useless.
Change the air filter when it is dirty.
Notice
When you use air filters from accessory
suppliers, the engine can be damaged.
Only use the original AS-Motor air filter
cartridges.
Beware! During filter change, accumulated dirt
in the air filter can get into the carburetor and
damage it.
1. Screw off the air filter cap.
2. Carefully pull out the filter element. Make
sure that no dirt from the inside of the air fil-
ter housing enters the carburetor.
3. Close the suction opening with a clean
cloth.
4. Thoroughly clean the inside of the air filter
housing.
5. Remove rough, loose dirt from the filter ele-
ment by tapping. Replace the filter element
in case of heavy, stubborn dirt.
6. Remove the cloth of the suction opening.
7. Re-insert the filter element.
8. Close the air filter cap again.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 63 4T B S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 63 4T B S in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 63 4T B S

AS Motor AS 63 4T B S User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info