AS 625 KM / AS 585 KM
AB 0B !B
A combined sticker located at
the back of the frame. (
Fig. 3
)
Before using the machine, .
( During your machine maintenance, .
) &$ into the cutting blade working area -
danger of cutting.
/ Dangerous flying fragments, cuttings, ejected objects, etc. . Other
persons and animals - keep a safe distance from the machine.
2 While working, observe the machine’s maximum allowed safe .
. C'
A separate sticker on the
cutting disc cover. (
Fig. 6
)
- $ - Right (Clockwise)
Sticker on the control lever on
the right handle. (
Fig. 4
)
-
%0'
7= cutting disk not rotating, = lock ON, (= cutting disk rotating
Sticker on the control lever on
the left handle. (
Fig. 5
)
-
4'
7= machine is still, = machine is moving
Sticker attached to the cutting
disk cover. (
Fig. 7
)
-
A for other persons and animals. Minimum safe distance from the
machine.
Sticker attached to the cutting
disk cover. (
Fig. 8
)
- < sound power .
Table 2: Safety Pictograms
1.3 Basic Information
1.3.1 Expected use
The .(234 brush cutter is designed and manufactured according to the latest findings concerning small garden and agricultural
technology. It features its great easy-to-use, quiet, powerful and fuel-efficient :D engine and trouble-free maintenance.
The 2,234brush cutter is technically based on AS 625 KM, however it is equipped with a Zongshen engine and a single-speed
wheel axle.
This cutter is designed for the cutting of tall thin-grassed growths and woody undergrowth
9
in the woods and on the meadow up to the
maximum height of 80 cm in maintained
10
areas. The areas must not feature any solid items in the growth or rough terrain. The cutter is
not designed for park landscaping.
E
The machine may operate in all the inclined positions defined by the engine manufacturer in the event that the operator is able to safely
guide the machine, both in relation to himself and the surroundings.
The protective devices comply with the requirements of EN 12733. These standards primarily take account of the operator's safety since
he cannot be hit by any stones or other objects thrown by the machine's rotating mechanism during the machine’s regular travel. Therefore,
the operator must always be in the regular control position, i.e. behind the machine, and with both hands firmly holding the handle.
&'
=
$$2A failure to observe this policy will damage the machine.
7
The area growth must be cut and raked at least once a year!
7
