736657
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
Starting the device (4-stroke
device)
1. Place the device on even terrain and not in
high grass.
2. Open the two fuel valves and the tank vent-
ilation.
3. Plug in the plug connector.
4. Set the accelerator lever during cold start
to the position “Choke”, otherwise to me-
dium speed.
5. Pull the starter rope slowly out until you feel
resistance and then pull out quickly – en-
gine starts to run.
6. Slowly release the starter rope.
7. For mowing, set the accelerator lever to the
maximum speed.
Driving and engaging the
blade
Warning
Risk of injury caused by tripping or sliding
while moving the mower backwards and
turning it round.
Make sure that the area is clear of ob-
jects and watch for safe footing.
Caution
Driving while the parking brake is on can
damage the parking brake.
Only drive when the parking brake is re-
leased.
In case of a hazardous situation, switch off the
drive and declutch the blade.
When crossing over paths, declutch the blade.
Driving with the blade
1. Lift the blade clutch lever.
2. Press the latch knob at the blade clutch
lever.
3. Press blade clutch lever towards the
handlebar.
ð Blade starts up.
ð Parking brake is released (if existing).
Driving without the blade
1. Press blade clutch lever towards the
handlebar (do not press the latch knob).
ð Parking brake is released (if existing).
Drive on
1. Pull the drive bar towards the handlebar –
device starts moving.
2. Use the vario lever to control the desired
speed.
Drive off:
1. Release the drive lever.
Pushing
1. Press blade clutch lever towards the
handlebar.
ð Parking brake is released (if existing).
ð Device can be pushed or rolls.
Driving down slope
When driving down slope, continue to have the
drive switched on to keep the driving speed
constant.
Adjusting speed
With the vario lever, you can continuously ad-
just the speed of the device.
Only adjust the driving speed when the engine
is running; otherwise, the vario drive can be
damaged.
Turning
Turn the device round only where the grass
has been mowed already.
Turning round on an even surface:
1. Switch off the drive.
2. Turn the device to the desired side.
3. Switch the drive back on.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 531 4T MK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 531 4T MK in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 531 4T MK

AS Motor AS 531 4T MK User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info