736659
26
Zoom out
Zoom in
Previous page
1/44
Next page
26
Cleaning position
Fig.11:
Caution
Risk of injury.
Guide bar can snap back.
To provide secure stand, place the guide
bar onto the ground.
1. Slacken the screw of the height adjustment
and flip the guide bar to the front (do not
crush the Bowden cables).
2. Flip the device to the rear as shown in the
figure.
3. Place the guide bar on the floor.
Beware: Do not tilt the device towards the air
filter side because then the engine oil can
enter the air filter and thus render the filter use-
less.
Cleaning the device
Depending on use, clean the device thor-
oughly, especially the bottom and the blade.
Grass cuttings and dirt that are stuck interfere
with the grass ejection and impair the cutting
quality. To sufficiently cool the engine, keep
the engine cover, ventilation grid and engine
clean.
Fire hazard! Take particular care that the com-
ponents at the silencer are clean.
For cleaning, use a hand brush. Remove stub-
born dirt with a wooden or plastic spatula.
Clean the outside housing parts with a cloth.
Do not clean the device with water spray or
high-pressure cleaner! Do not use any ag-
gressive cleaning agents.
General inspection
To make sure that the device can be operated
safely, check all nuts, bolts, screws, connec-
tions of fuel lines, air filters etc. regularly for
proper condition and firm seating. Check the
ignition wire and the spark plug connector for
damage.
Change the damaged or used parts especially
covers, grass collection bag, silencer, abrasive
strip, impact protection or fuel immediately (au-
thorised service centre).
Check all parts that that contain fluids for leaks
and proper condition. These can be: Fuel tank,
fuel valve, fuel lines, carburetor, engine, gears,
battery, hydraulic system.
In case of leaks, contact an authorised service
centre.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 531 2T ES MK B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 531 2T ES MK B in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 531 2T ES MK B

AS Motor AS 531 2T ES MK B User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info