736661
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
Starting
Danger
Danger of electric shock from live cables on
the mowing area. Live cables can be dam-
aged during mowing and cause an electric
shock or short circuit.
Make sure that the mowing area is free
of live cables.
Warning
During startup, there is a risk of injury
caused by the rotating blade.
Make sure that no one is within the
danger zone of the blade. Do not tip the
device over to one side during startup.
Warning
Danger of poisoning due to poisonous ex-
haust gases.
Do not operate the engine in closed or
insufficiently ventilated rooms.
Please observe the safety instruction re-
garding the poisoning risk.
Warning
If after startup the carburetor does not close
properly, fuel will overflow and a fire hazard
occurs.
Close the fuel valve and contact an au-
thorised service centre.
Starting the device
1. Place the device on even terrain, not in
high grass.
2. Pull the starter grip slowly to the rear and
attach it onto the starter grip holder.
3. Close the fuel valve and the tank ventila-
tion.
4. Plug in the plug connector.
5. Only for cold start: Close the choke at the
carburetor (turn anti-clockwise).
6. Press the tickler at the carburetor until fuel
flows.
7. Actuate and hold the engine brake bar.
8. Pull the starter grip slowly out until you feel
resistance and then pull out quickly – en-
gine starts to run.
9. Slowly bring the starter grip back and at-
tach it onto the starter grip holder.
10. Reopen the choke (turn clockwise).
Driving
Warning
Risk of injury due to tripping or slipping
when driving in reverse, pulling backwards
and turning.
Make sure that your path is free of
obstacles and ensure safe footing.
Notice
Driving when the drive and brake are simul-
taneously pressed damages the brake.
Release the drive lever when you brake.
Driving
In case of a dangerous situation, switch off the
blade by releasing the engine brake lever.
While driving forward, all four wheels are
driven.
Drive on
1. Use the varioshift lever to set the desired
speed.
2. Release the brake.
3. Press the drive lever towards the handlebar
– device starts moving.
Drive off:
1. Release the drive lever.
Adjusting speed
With the vario lever, you can continuously ad-
just the speed of the device.
Only adjust the driving speed when the engine
is running; otherwise, the vario drive can be
damaged.
The front axis is equipped with a permanent
differential lock. This improves traction and the
driving stability of the device. The danger of
slipping is reduced.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 53 2T ES 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 53 2T ES 4WD in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 53 2T ES 4WD

AS Motor AS 53 2T ES 4WD User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info