736651

AS Motor AS 470 E ProClip Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
15
Information on mowing
Prior to mowing, check the device for com-
pleteness, proper function, and cleanliness. A
dirty ventilation grid causes overheating of the
engine which can result in engine damage.
For your grass to grow beautiful and thick,
mow frequently and keep the grass short. Do
not mow your lawn too low in dry and hot con-
ditions because the lawn is susceptible to sun
and heat damage and will look unsightly!
Only mow with a sharp and undamaged blade
so that the blades of grass do not fray. Have
the blade sharpened and balanced regularly
(authorised service centre).
Do not mow when the grass is wet or when it is
raining. The turf may be damaged and there is
a danger of slipping!
Turn the device around only in already mown
sections. Do not leave the device unattended
while the engine is running.
To evenly distribute grass remains and to
achieve an even cutting height, we recom-
mend, for flat terrain, to proceed according to
the illustrated mowing pattern.
A mulching mower shreds the clippings better
and finer than a conventional mowers. For an
optimal cutting pattern, please heed the follow-
ing recommendations.
Recommendations for mowing with
mulching mowers:
– Mow only 1/3 of the grass height.
– Do not set the brush height to the lowest po-
sition. Recommendation: 50-60mm.
– Work under dry conditions.
– Start with slow speed.
– The slower you drive the better the cutting
result.
– If the grass is too high, you should mow in
maximum cutting height first and later mow
again in the recommended cutting height.
– If clumps form or the mulching layer is too
thick, the air exchange of the soil can be re-
stricted. Areas of rot can result.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 470 E ProClip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 470 E ProClip in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 470 E ProClip

AS Motor AS 470 E ProClip User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info