736650
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
Troubleshooting
The following table contains the most frequent problems and their elimination. If more problems
occur, contact the closest authorised service centre.
You can find an authorised service centre on our home page www.as-motor.com.
Problem Possible cause Remedy
Engine does not start Engine brake bar is not
pressed.
Press the engine brake bar towards the
handlebar.
Battery is not inserted correctly. Remove battery and insert correctly.
Safety key is not inserted. Insert the safety key.
Housing of the mower is
jammed.
See Maintenance.
Engine does not start
or goes out, 2 signal
tones.
Battery empty or defective. See Charging the battery.
Engine does not start
or goes out, 3 signal
tones.
Current consumption was too
high for a short time.
Wait for 5 seconds and restart the
device.
Engine does not start
or goes out, 5 signal
tones.
Engine or battery is over-
heated.
Clean ventilation grid.
Wait for 10 minutes and restart the
device.
Engine starts badly or
runs irregularly
Housing of the mower is
jammed.
See chapter Maintenance.
No or insufficient
drive when the drive
bar is actuated.
Drive belt is insufficiently ten-
sioned.
Authorised service centre
Drive train is incorrectly adjus-
ted.
Check the drive (see Maintenance).
Clutch is worn. Check the drive (see Maintenance).
The blade slides Replace friction discs. Authorised service centre.
Strong vibrations dur-
ing operation
Imbalance of the blade caused
by incorrect sharpening or
chips on the blade.
Have blade resharpened and balanced
by an authorised service centre. Re-
place a damaged blade immediately.
Blade drive shaft is bent due to
collisions with foreign objects.
Authorised service centre.
Engine fastening is loose. Authorised service centre.
Blade fastening is loose. Authorised service centre.
Irregular noises Loose fastening elements. Authorised service centre.
Engine gets hot Ventilation grid is dirty. Clean ventilation grid.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 420 E ProClip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 420 E ProClip in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 420 E ProClip

AS Motor AS 420 E ProClip User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info