Manual AS Motor AS 420 4T (page 13 of 29) (English)

736648

Zoom out

Zoom in

1/29

Information on mowing

Prior to mowing, check your device for com-

pleteness, proper functioning, and cleanliness.

A dirty ventilation grid causes overheating of

the engine, this can damage the engine. A dirty

protective grid on the silencer poses a fire haz-

ard.

For your grass to grow beautiful and thick,

mow frequently and keep the grass short. Do

not mow your lawn too low in dry and hot con-

ditions because the lawn is susceptible to sun

and heat damage and will look unsightly!

Only mow with a sharp and undamaged blade

so that the blades of grass do not fray. Have

the blade sharpened and balanced regularly

(authorised service centre).

Do not mow when the grass is wet or when it is

raining. The turf may be damaged and there is

a danger of slipping!

Turn the device around only in already mown

sections. Do not leave the device unattended

while the engine is running.

To evenly distribute grass remains and to

achieve an even cutting height, we recom-

mend, for flat terrain, to proceed according to

the illustrated mowing pattern.

A mulching mower shreds the clippings better

and finer than a conventional mowers. For an

optimal cutting pattern, please heed the follow-

ing recommendations.

Recommendations for mowing with

mulching mowers:

– Mow only 1/3 of the grass height.

– Do not set the brush height to the lowest po-

sition. Recommendation: 50-60mm.

– Work under dry conditions.

– Start with slow speed.

– The slower you drive the better the cutting

result.

– If the grass is too high, you should mow in

maximum cutting height first and later mow

again in the recommended cutting height.

– If clumps form or the mulching layer is too

thick, the air exchange of the soil can be re-

stricted. Areas of rot can result.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 420 4T in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 420 4T

AS Motor AS 420 4T User Manual - German - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AS Motor AS 420 4T Manual

Product: