736667
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Checking rear brake
Warning
If the brakes are incorrectly adjusted, the
device can roll away.
Make sure that the brake is always func-
tioning properly.
1
Fig.9:
1. Put the device on a non-slip surface (e.g.
concrete or asphalt)
2. Switch off the drive.
3. Actuate the rear brake.
4. Try to move the device.
If the rear wheels lock, the rear brake is cor-
rectly adjusted. If you can push the device, the
rear brake must be re-adjusted.
Re-adjusting the rear brake:
Turn the adjusting screw (1) at the brake lever
until the wheel lock while the brake is applied.
When the adjustment is completed and the
braking performance still has not improved,
have an authorised service centre check the
device.
Checking the drive
1. Put the device on a non-slip surface (e.g.
concrete or asphalt).
2. Switch off the engine.
3. Actuate the drive.
4. Try to pull the device backwards.
If the rear wheels lock, the drive is correctly ad-
justed. If you can pull the device, the drive
must be re-adjusted.
1
Re-adjusting the drive
Turn the adjusting screw (1) at the drive so that
the wheels lock, while the drive is actuated,
when the device is pulled. If there is no im-
provement after the adjustment, have the
device checked by an authorised service
centre.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 28 2T ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 28 2T ES in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 28 2T ES

AS Motor AS 28 2T ES User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info