736665
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
Checking the engine oil level
Beware! Prior to each use, check the engine
oil level (see operating manual of the engine
manufacturer).
To ensure an adequate oil supply for the
4-cycle engine and to avoid engine damage,
the device may only be used up to a slope in-
clination of 20 degrees.
Adjusting cutting height
Adjust the cutting height setting only when the
engine is switched off.
Set the cutting height so that the blade does
not touch the ground even in case of terrain
unevenness. If the cutting height is set too
high, objects can be ejected and the “clean cut
appearance” can be destroyed.
The rear wheel height setting determines the
coarse setting of the cutting height. The height
of the steerable front wheel determines the fine
setting of the cutting height.
Cutting height at the rear wheels
The rear wheels can be mounted in two differ-
ent levels.
1. Switch off the engine and wait until the
blade has come to a standstill.
2. Remove the wheel cap from the rear
wheel.
1
3. Slacken the wheel bolt(1).
4. Pull out the wheel together with the cover
plate.
4
2
3 5
5. Screw it back in in position (2) or(3).
(2) = low cutting height
(3) = higher cutting height.
6. Tighten the rear wheel to a torque of
40+5Nm.
7. Put the wheel cap back on.
8. Carry out the same procedure at the other
rear wheel.
Notice: To increase speed, a pinion with
13teeth is available as accessory. If this pinion
is installed, the wheel bolt must be screwed in
the other bore holes(4)/(5).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 21 4T B S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 21 4T B S in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 21 4T B S

AS Motor AS 21 4T B S User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info