736686
32
Zoom out
Zoom in
Previous page
1/36
Next page
Troubleshooting
32
Blade cannot be en-
gaged
Lever for cutting height adjust-
ment in transport position.
Lower lever for cutting height adjustment
to the desired cutting height.
The blade does not
rotate
V-belt is insufficiently tensioned
or damaged.
Authorised service centre.
Bowden cable is defective. Authorised service centre.
Strong vibrations dur-
ing operation
Unbalance due to missing,
broken, cracked or unevenly
worn blades.
Checking the blade and flail shaft
(see Maintenance).
Flailshaft is bent due to colli-
sions with foreign objects.
Authorised service centre.
Engine fastening is loose. Authorised service centre.
Blade fastening is loose. Authorised service centre.
Irregular noises Loose fastening elements. Authorised service centre.
Muffler is defective. Authorised service centre.
Hydrostatic drive is overheated. Cool down (see Maintenance).
Engine is smoking Air filter is dirty or drenched with
oil.
Maintain or replace air filter
(see Maintenance).
Oil level is too high. Have authorised service centre lower
the oil level up to the marking.
Engine gets hot Ventilation grid is dirty. Clean ventilation grid.
Oil level in the engine is too low. Refill engine oil (see operating instruc-
tions of the engine manufacturer).
Cooling fins of the engine are
dirty.
Have cooling fins cleaned by authorised
service centre.
Poor cutting Blade is dull or worn. Have someone replace a damaged
blade immediately (authorised service
centre).
Speed is too high proportion-
ately to the cutting height.
Reduce speed and/or select the correct
cutting height.
Housing of the device is heavily
contaminated.
Clean.
Different tire pressure. Check the tyre pressure.
Mower housing is not parallel to
the ground.
Adjust (authorised service centre).
Mulching result with
high plant material
not satisfactory
Speed is too high. Reduce speed.
Mulching result with
low plant material not
satisfactory
Plant material is ejected too
quickly.
Increase speed.
Housing is jammed Mowed grass was too long or
too damp.
Adjust cutting height and mowing speed
to the mowing conditions.
Blade is worn. Authorised service centre.
Engine speed is too low despite
full power.
Authorised service centre.
The device does not
stop when the brake
is activated
Brake is adjusted incorrectly,
worn, or defective.
Check the parking brake (see Mainten-
ance). Authorised service centre.
The engine does not
switch off
Switching off system is defect-
ive.
Close the fuel valve.
Authorised service centre.
The tires become flat Thorns or sharp objects dam-
age the tires.
If necessary, use tire protection gel
(authorised service centre).
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 1040 YAK 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 1040 YAK 4WD in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 1040 YAK 4WD

AS Motor AS 1040 YAK 4WD User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info