707255
19
Zoom out
Zoom in
Previous page
1/24
Next page
4.2.2.2. Hold Button
MicroLab's Hold button can be configured to work as an on/off switch ("toggle")
or a momentary switch ("gate") through the Option drop-down menu.
Toggle
means that you must press the Hold button once to engage sustain mode and
press it again to switch it off.
Gate
means that sustain mode is active when you
are pressing it and that it is immediately switched off the instant you release the
button. You can select what method works best for you.
4.2.2.3. Pitch Strip
The Mode drop-down menu lets you switch MicroLab's Pitch strip on or off. The
default
Pitch Bend
setting means the strip will operate as a pitch bend controller.
Set this to
Off
you would like to deactivate the strip.
Option menu lets you set how the Pitch strip behaves upon release. A traditional
pitch bend wheel (found on many synthesizers and MIDI Controllers) is normally
spring-loaded so it will snap back to its center position when released. The
default
Standard
option on MicroLab does exactly this—when you release the
touch strip, the pitch control returns to the middle position in your software. If
you would prefer the Pitch strip to maintain its position when you remove your
finger from the pitch strip, set this to
Hold
.
Channel lets you select an output MIDI channel for the Pitch strip. Note that by
selecting
1-16
, you set the Pitch strip's output MIDI channel explicitly and this
does not have to be same as the MicroLab keyboard's output MIDI channel (for
example, keyboard can be on channel 1 but Pitch strip on channel 3). It is also
possible to have the Pitch strip "follow" whatever MIDI channel the keyboard is
using by selecting
Keyboard
from the drop-down menu.
Arturia - User Manual MicroLab - MIDI Control Center 15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia MicroLab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia MicroLab in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia MicroLab

Arturia MicroLab User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info