748333
84
Zoom out
Zoom in
Previous page
1/104
Next page
To clear the modulation in a track, press the Oct | Mod button several times until the light of
the track you want to erase blinks. Then hold Oct | Mod button and press the Hold icon.
Note: A quick way to clear all modulation tracks is to hold the Oct | Mod button and press the
Hold icon repeatedly.
13.2.2. Real-time recording of modulation
Modulation recording in real time is similar to recording in step mode. The only difference is
that both Play and Record need to be active. Recording will occur from the first step where a
movement was recorded. It will then make one full loop and stop just before the step where
you started the modulation recording. Once the loop finishes, the Record button turns off
and real-time recording ends.
Erasing a modulation track is the same as in step-recording mode:
Press and hold Oct | Mod
Press “Hold” (no need to hold it)
Current modulation track is erased
Keep Oct | Mod held and press “Hold” to erase the next modulation track. Press
Hold repeatedly if you want to clear all modulation tracks.
Note: It is possible to record knob movements from external controllers in the Sequencers
and to Record knob movements of the MicroFreak on external devices such a DAW.
For an overview of knobs/parameters that can be recorded in a modulation track refer to
the table in the step-time recording paragraph above.
13.2.3. Smoothing
Smoothing (also called "slew") makes modulation transitions less abrupt. It is the same
effect that you achieve by applying Glide to pitches: pitch changes will become more
gradual when you move from one pitch to another.
Smoothing does the same for modulation. You can apply it to each of the four modulation
tracks in Utility: select Utility>Preset>Seq (X) smooth. By substituting X with one, two, three or
four you apply the smoothing effect to one of the modulation tracks.
Smoothing works in both Step mode and Real-time mode but the setting with which a blank
sequence starts will be different:
A new Seq Mod track that is created using step-recording is set to Smooth Off by
default.
A new Seq Mod track that is created using the real-time recording is set to
Smooth On by default.
Note: Overwriting on an existing track does not change the Smooth setting.
13.3. Fun with Sequences
To make a sequence come alive, it's good practice to add rests and ties to it. You have
64 sequencer steps at your disposal, so there is plenty of space to insert them. A 32-step
sequence with rests and ties played at double speed will sound a lot more interesting than
a 16-step sequence with all steps filled and played at normal speed.
79 Arturia - User Manual MicroFreak - The Sequencer
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia MicroFreak at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia MicroFreak in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info