707157
63
Zoom out
Zoom in
Previous page
1/88
Next page
7. CV / GATE / MOD CONNECTIONS
Rather than merely focus on controlling DAWs, plug-in software, and MIDI devices, the
engineers at Arturia thought it would be really cool if the KeyLab mkII could also interface
with modular analog synthesizers and their components.
And so on the rear panel we included a handful of control voltage connections, giving the
KeyLab mkII the ability to interface with almost any kind of music-making technology.
Incoming voltages can be converted to USB/MIDI data and captured by your DAW, where it
can be used as a modulation source for plug-in synthesizers such as those found in Analog
Lab 3.
And in the opposite direction, the front panel controls and pedals can be routed through the
output connectors to the inputs of a modular synthesizer system.
7.1. CV Input connector
The CV input connector allows an incoming voltage to be used as a modulation source. In
User Edit mode the converted voltage can be routed to a specific MIDI CC#, on a particular
MIDI Channel, within a defined range, as if it were another control such as an Aux Pedal,
for example.
The converted signal will be sent to the MIDI and USB ports, where it can be used as a
modulation source for external MIDI devices or a software plug-in, etc.
The incoming voltage would most likely be received from a semi-modular analog
synthesizer such as Arturia's MatrixBrute, a MiniBrute 2, or some other synthesizer. There
some great modulation sources available in Eurorack format, and the CV In connector
enables you to grab the signal coming from one (or more) of those modules and use that
complex signal within a DAW environment.
Different manufacturers use different voltage standards, and so the KeyLab mkII and the
MIDI Control Center [p.61] (MCC) allow you to set the voltage range to match the incoming
device. The range is 1-10 Volts, which is broad enough to cover any analog synthesizers you
might encounter.
7.1.1. Parameters (User Edit mode)
Connector / User Edit mode name Parameter Range
CV In / CV Mod In MIDI Ch 1-16, User, Part 1, Part 2
CC 0-127
Max/MSB 0-127
Min/LSB 0-127
Volt range 1-10 V
Arturia - User Manual KeyLab MkII - CV / Gate / Mod connections 58
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MKII 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MKII 61 in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MKII 61

Arturia Keylab MKII 61 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info