26 ARTURIA – KeyLab – USER’S MANUAL
If the switch is set to Ctrl Toggle, this is the second of two alternating values sent
when the switch is pressed.
For a switch in Patch Chg mode, this defines the bank LSB.
For a switch in one of the Note modes, this is the velocity value sent with the
Note Off command.
3.10 Max MSB
As with the Min LSB parameter, this serves various functions depending on the selected
control and its mode:
For a knob, pad or fader in Ctrl mode, contains the maximum value sent.
For a knob or fader in NRPN/RPN mode, contains the NRPN/RPN controller
number MSB (Most Significant Byte).
For a switch in Control mode, this value will be sent when the switch is pressed.
If the switch is set to Ctrl Toggle, this is the first of two alternating values sent
when the switch is pressed.
For a switch in Patch Chg mode, this defines the bank MSB.
For a switch in one of the Note modes, this is the velocity value sent with the
Note On command.
It can be useful to set Min to a greater value than Max. This allows a single control to be inverted, as
opposed to putting all of the Faders into Drawbar mode, for example.
