694454
7
Zoom out
Zoom in
Previous page
1/36
Next page
Positioning and mounting the boiler
For ease of handling, transport and import of boiler, Polifuel is delivered in parts that need be mounted on
the boiler when the boiler is in the boiler room. These parts need to be installed on the boiler:
- Fan - mount on the back of boiler, is obligatory to use the flange gaskets fan, fastened using M8 bolts
and nuts. Plug-connector for power supply fan and the fan tachometer in the back of the control box. Fan
output can be mounted in any directions.
- Mechanism for grating cleaning - mount on the right side of the boiler ( in this side is pellet tank), must
be fastened using M8 bolts and nuts. After assembly, it is necessary to attach the lever burner grid with
gear motor trail. Plug-in two cables with connectors (motor and microswitches).
- Connection tubes - mount connecting tube with 4-way mixing valve to the boiler so that the T-piece is
in the upper side. On the upper connector of the T-piece incorporate safety ventilation group. On the
back of boiler were prepared two holenders for mounting connection tubes (connection tubes with 4-
way mixing valve). Be sure to use the seal for
holenders. Set
return temperature sensor in the elbow
with a socket for the sensor between the 4-way mixing valve and the boiler. It is obligatory using the
included thermal paste. Plug-in return flow sensor on the back of the box control. Connect the pump
cable with connector to the back of the control box. Mandatory set the pump on the speed 3.
- Elbow with socket for the flow sensor -must necessarily be installed after 4-way mixing valve on the
flow of the installation. Set flow sensor in the socket for sensor. It is obligatory using the included
thermal paste. Plug-in return flow sensor on the back of the box control.
- Motor device - set the motor device to the 4-way mixing valve. Plug-in the power connector on the
back of the control box.
- Pellet level in the tank sensor - mount this sensor on the back side inside of the pellet tank (see page
9). First set the plastic glass distance for sensor. After that, put the sensor on this glass. Attach the
sensor and the plastic distance with 4 screws supplied. Attach protective cover. Plug-in the cable with
connector of the pellet level
sensor
on the back of the box control.
- Pellet tank - mount pellet tank according installation manual for mounting pellet tank. Set up pellet
transporter in the pellet tank. Place the pellet tank to the boiler and set PVC tube to conveyor and tube
supply on the boiler. Set up the PVC tube so as to allow the smooth falling pellet into the burner. If
necessary, cut the PVC tube to the required length. Plug-in the power connector on the back of the
control box.
NOTE: check the tightness of connection tubes. Fasten connections binding tubes if necessary, so that
a good seal.
7
Technical instructions Polifuel
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Artel Polifuel 36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Artel Polifuel 36 in the language / languages: English as an attachment in your email.

The manual is 24,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info